Standards

DB51/T 2972-2022 Abolished

DB51/T 2972-2022 The vacuum brazing process requirements for the structural components of automotive electronic devices

This document specifies the requirements for the vacuum brazing process of structural components of on-board electronic equipment. This document is applicable to the vacuum brazing of structural components of on-board electronic equipment made of aluminum and aluminum alloys, such as 1070A, 1060, 1050A, 1035, 1200, 8A06, 3A21, 6061, and 6063.

Publish Date: 2022-12-27

DB51/T 2973-2022 Abolished

DB51/T 2973-2022 The process quality control requirements for the aero-electrical system product using aramid paper honeycomb components

This document specifies the general requirements for process quality control of machining of honeycomb core parts made of phenolic resin aramid paper used in avionics system products. This document is applicable to the machining process of paper honeycomb sandwich panels and wave-absorbing honeycomb core parts used in avionics system products.

Publish Date: 2022-12-27

DB51/T 2974-2022 Abolished

DB51/T 2974-2022 The process quality control requirements for avionics system products made from PMI foam

This document specifies the process and quality control requirements for PMI foam used in avionics system products, as well as packaging and storage requirements. This document applies to PMI foam parts in avionics system products.

Publish Date: 2022-12-27

DB51/T 2253-2022 Abolished

DB51/T 2253-2022

This document specifies the requirements for tissue culture seedling production, sowing seedling production, and technical archiving of Acer pentaphyllum Diels. This document is applicable to the tissue culture seedling and sowing seedling production of Acer pentaphyllum Diels in Sichuan Province.

Publish Date: 2022-12-27

DB51/T 1155-2022 Abolished

DB51/T 1155-2022 The cultivation technical specifications for camphorwood plantation of Xiangchun

This standard specifies the technical measures for the seedling cultivation, forestation, and management of Chinese toon trees. This standard is applicable to the cultivation of Chinese toon timber forests within the territory of Sichuan Province.

Publish Date: 2022-12-27

DB51/T 2984-2022 Abolished

DB51/T 2984-2022

This standard specifies the assessment criteria for the health grade of spruce (Picea asperata Mast.) plantations, technical specifications for healthy management, and an evaluation index system and evaluation methods for the health status of plantations. This standard is applicable to the healthy management and evaluation of spruce plantations in western Sichuan Province.

Publish Date: 2022-12-27

T/GDKJ 0023-2022 Abolished

T/GDKJ 0023-2022 Food packaging adhesive quality specifications

主要技术内容:本标准规定了包装材料用胶粘剂的术语和定义、分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存等事项

Publish Date: 2022-12-26

T/UNP 13-2022 Abolished

T/UNP 13-2022 Radiation shielding conductive fabric technical specification

主要技术内容:1  范围2  规范性引用文件3  术语和定义4  质量要求4.1  外观4.2  一般理化性能4.2.1  密度偏差率4.2.2  质量偏差率4.2.3  纤维含量允差4.2.4  断裂强力4.2.5  撕破强力4.2.6  纰裂程度4.2.7  水洗尺寸变化率4.2.8  色牢度4.2.9  起毛起球4.2.10  悬垂系数4.3  防辐射性能4.4  防静电性能4.5  安全性能5  试验方法5.1  外观5.1.1  幅宽偏差率5.1.2  色差5.1.3  外观疵点5.2  一般理化性能5.2.1  密度偏差率5.2.2  质量偏差率5.2.3  纤维含量允差5.2.4  断裂强力5.2.5  撕破强力5.2.6  纰裂程度5.2.7  水洗尺寸变化率5.2.8  色牢度5.2.9  起毛起球5.2.10  悬垂系数5.3  防辐射性能5.4  防静电性能5.5  安全性能

Publish Date: 2022-12-26

T/UNP 14-2022 Abolished

T/UNP 14-2022 Jinlan and cotton interlaced printing fabric technical specifications

主要技术内容:1  范围2  规范性引用文件3  术语和定义4  质量要求4.1  外观4.2  理化性能4.3  安全性能5  试验方法5.1  外观5.2  理化性能5.3  安全性能6  检验规则7  标志与包装

Publish Date: 2022-12-26

T/UNP 15-2022 Abolished

T/UNP 15-2022 Car safety belt installation and fixation points general technical requirements

主要技术内容:1  范围2  规范性引用文件3  术语和定义4  通用要求4.1  一般要求4.2  ISOFIX固定点要求4.3  符合ISOFIX上拉带固定点要求4.4  符合I-Size固定点要求4.5  儿童乘坐位置固定点要求5  数量要求5.1  常规固定点最低数量要求5.2  ISOFIX位置的最低数量要求6  位置要求6.1  总则6.2  安全带下有效固定点位置6.3  安全带上有效固定点的位置7  孔尺寸要求8  强度要求

Publish Date: 2022-12-26

T/UNP 16-2022 Abolished

T/UNP 16-2022 Vehicle information collection data specification

主要技术内容:1  范围2  规范性引用文件3  术语、定义和缩略语3.1  术语和定义3.2  缩略语4  概述4.1  采集原则4.2  采集流程5  采集内容5.1  车辆/系统/设备信息5.2  应用程序信息5.3  导航数据信息5.4  通讯/娱乐数据信息5.5  事件数据信息6  数据表示6.1  基本属性6.2  数据类型及格式6.3  约束的表示6.4  摘要描述7  采集设备7.1  硬件设备7.2  软件设备

Publish Date: 2022-12-26

T/DGWCA 0015-2023 Abolished

T/DGWCA 0015-2023 Product self-inspection guidelines for the cable industry

范围:为了将质量帮扶和扶优治劣工作落到实处，东莞市电线电缆行业协会依据章程开展此项自检工作；自检范围为东莞市内市场销售产品企业，包含大中小微企业、主要以东莞市内产品为主。 本文件是2022年东莞市社会组织发展扶持专项资金资助的“规范线缆市场秩序，树立协会‘湾缆’品牌”项目的内容之一; 主要技术内容:本文件规定了东莞市电线电缆行业企业行业自检应遵照的原则、指标和方法等内容。本文件适用于对电线电缆行业内企业的线缆产品采取质量评价，其目的是为规范企业经营行为，保护生产、经营者与消费者的合法权益，并向消费者提供消费信息和咨询服务，其他行业组织可参照本文件并自愿采用

Publish Date: 2022-12-26