GB/T 6531-1986
Active
GB/T 26985-2011
Replaced
National standards
GB/T 26985-2011 Standard test method for pour point of crude oils
GB/T 26985-2011 Standard test method for pour point of crude oils
Basic Information
Standard Code:
GB/T 26985-2011
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Crude oil
ICS Name:
Crude oil
Publish Date:
2011-09-29
Implement Date:
2012-01-01
Pages:
10 pages
Scope
This standard specifies the method for determining the pour point of crude oil, including the maximum (upper) pour point and the minimum (lower) pour point.
This standard is applicable to crude oil with a pour point not lower than -36℃ and a water content of no more than 0.5% by mass.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 514-1983 Liquid in glass thermometers for petroleum products—Specification
GB/T 514-2005 Specification for liquid-in-glass thermometers for testing of petroleum products
GB/T 4756-1998 Petroleum liquids—Manual sampling
GB/T 4756-2015 Method for manual sampling of petroleum liquids
SY/T 5317-2006 SY/T 5317-2006 Petroleum liquid pipeline automatic sampling method
Adopt standards
ASTM D5853-06
Related Standards
GB/T 6532-1986
Replaced
GB/T 6532-1986 Crude petroleum and products—Determination of salt content
GB/T 6533-1986
Replaced
GB/T 6533-1986 Crude petroleum—Determination of water and sadiment—Centrifuge method
GB/T 8929-1988
Replaced
GB/T 8929-1988 Crude oil—Determination of water—Distillation method
GB/T 13377-1992
Replaced
GB/T 13377-1992 Crude petroleum and liquid or solid petroleum products—Determination of density or relative density—Capillary stoppered pyknometer and graduated bicapillary pyknometer method
GB/T 17280-1998
Replaced