GB/T 40853.2-2023 Active National standards

GB/T 40853.2-2023 High frequency inductive components—Electrical characteristics and measuring methods—Part 2:Rated current of inductors for DC to DC converters

Publish Date: 2023-11-27 Implement Date: 2024-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 40853.2-2023

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Inductors and transformers

ICS Name: \nMagnetic components

Publish Date: 2023-11-27

Implement Date: 2024-03-01

Pages: 18 pages

Scope

This document describes the measurement method for the DC rated current of small inductors.
Users can compare the rated current in different manufacturers' manuals by using standard rated current measurement methods.
This document is applicable to leaded and surface-mounted inductors with dimensions that comply with IEC 62025-1 and a rated current generally less than 22 A, as well as to some inductors with dimensions that comply with IEC 62025-1 requirements but a rated current exceeding 22 A (with an installation area not exceeding 12 mm×12 mm) for the measurement of their rated current. These inductors are typically used in DC-DC converters on PCB boards in electronic and telecommunications equipment and small-sized switching power supply modules.
This document is only applicable to the measurement of saturation current and temperature rise current under DC current conditions.

Development Information

Word Count: 37 Thousand words Pages: 18 pages

Referenced Standards

GB/T 2421-2020 Environmental testing—General and guidance IEC 62025-1

Adopt standards

IEC 62024-2:2020

Related Standards

GB/T 4596-1984 Replaced

GB/T 4596-1984 E-cores for three-phase transformers for use in electronic equipment

Publish Date: 1984-07-21

GB/T 9632.1-2002 Abolished

GB/T 9632.1-2002 Measuring methods of cores for inductors and transformers for telecommunications

Publish Date: 2002-07-18

GB/T 18909-2002 Active

GB/T 18909-2002 Sectional specification for high-frequency inductors and intermediate frequency transformers for use in electronic equipment for capability approval

Publish Date: 2002-12-04

GB/T 9634.1-2002 Active

GB/T 9634.1-2002 Ferrite cores-Guide on the limits of surface irregularities—Part 1:General specification

Publish Date: 2002-12-04

GB/T 9634.2-2002 Replaced

GB/T 9634.2-2002 Ferrite cores—Guide on the limits of surface irregularities—Part 2:RM-cores

Publish Date: 2002-12-04

GB/T 9634.3-2002 Active

GB/T 9634.3-2002 Ferrite cores—Guide on the limits of surface irregularities—Part 3:ETD-cores and E-cores

Publish Date: 2002-12-04