GB 449-1984
Replaced
LY/T 1002-2012
Active
Industry standards-Forestry
LY/T 1002-2012 Pole on the truck
LY/T 1002-2012 Pole on the truck
Basic Information
Standard Code:
LY/T 1002-2012
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Raw logs and original timber
ICS Name:
\nTimber, logs, and sawn timber
Publish Date:
2012-02-23
Implement Date:
2012-07-01
Pages:
4 pages
Scope
This standard specifies the requirements for vehicle columns, sampling methods, inspection methods, volume calculation, and product marking.
This standard applies to small-diameter logs used for protection and reinforcement when loading timber on railway freight cars.
Development Information
Replace the following standards
Referenced Standards
GB/T 144-1995 Log inspection
GB/T 144-2003 Log inspection
GB/T 144-2013 Log inspection
GB/T 144-2024 Log inspection
GB/T 11716-1999 Logs of small diameter
GB/T 11716-2009 Logs of small diameter
GB/T 11716-2018 Logs of small diameter
GB/T 17659.1-1999 Sampling and judging methods for lot inspection of logs and sawn timbers—Part 1:Sampling and judging methods for lot inspection of logs
GB/T 17659.1-2018 Sampling and judging methods for lot inspection of logs and sawn timbers—Part 1:Sampling and judging methods for lot inspection of logs
LY/T 1511-2002 Mark imprint for log products
GB/Z 144-2025 Course development guide for education about standardization—Automotive standardization and application
Related Standards
GB 4814-1984
Replaced
GB 4814-1984 Log volume table
GB 4815-1984
Replaced
GB 4815-1984 Volume table of Chinese fir tree poles
GB/T 11717-1989
Replaced
GB/T 11717-1989 Pulp logs
GB/T 1930-1991
Replaced
GB/T 1930-1991 Method for determination of the annual rings width and latewood rate of wood
GB/T 15106-1994
Replaced