GB/T 40797-2021 Active National standards

GB/T 40797-2021 Rubber,vulcanized or thermoplastic—Determination of resistance to abrasion—Driven,vertical abrasive disc method

Publish Date: 2021-10-11 Implement Date: 2022-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 40797-2021

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Rubber products and their auxiliary materials

ICS Name: Rubber

Publish Date: 2021-10-11

Implement Date: 2022-05-01

Pages: 11 pages

Scope

This document describes a method for determining the wear resistance of rubber using a vertically driven grinding disc.
The wheel-shaped rubber specimens are perpendicular to the grinding disc and are pressed against each other under a set load. The mass loss due to wear is measured by the sliding generated by setting different side tilt angles, rotational speeds, and certain loads between the wheel-shaped specimens and the grinding disc. The test results are expressed as the mass loss per unit running distance and/or the wear index compared with the reference rubber material.
This document is suitable for comparative tests, quality control, regulatory compliance tests, arbitration tests, and R&D work.
Since the described test device can independently set various wear parameters, such as the side tilt angle, the rotational speed of the grinding disc, and the load, this method can be widely used for wear tests of various rubber products (especially tires).