GB/T 25338.1-2010 Replaced National standards

GB/T 25338.1-2010 Switch machine for railway—Part 1:General specification

GB/T 25338.1-2010 Switch machine for railway—Part 1:General specification

Publish Date: 2010-11-10 Implement Date: 2011-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 25338.1-2010

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Signal equipment

ICS Name: Integrated Railway Engineering

Publish Date: 2010-11-10

Implement Date: 2011-03-01

Pages: 11 pages

Scope

This part of GB/T 25338 specifies the terminology, classification, technical requirements, inspection rules, marking, packaging, transportation, and storage of electric, electro-hydraulic, and electro-pneumatic turnout machines (hereinafter referred to as "turnout machines") used in railway turnouts.
This part is applicable to the design, production, and maintenance of turnout machines and the conversion locks driven by turnout machines.

Development Information

Word Count: 18 Thousand words Pages: 11 pages

Same series standard

GB/T 25338.2-2010 Switch machine for railway—Part 2:Test methods

Superseded by the following standards

GB/T 25338.1-2019 Switch machines for railways—Part 1:General specification

Referenced Standards

GB/T 755-2008 Rotating electrical machines—Rating and performance GB/T 2408-2008 Plastics—Determination of burning characteristics—Horizontal and vertical test GB/T 2423.16-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test J and guidance:Mold growth GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability) GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB/T 4942.1-2006 Degrees of protection provided by the integral design of rotating electrical machined(IP code)—Classification GB/T 13912-2002 Metallic coatings—Hot dip galvanized coatings on fabricated iron and steel articles—Specifications and test methods GB/T 18684-2002 Specifications of Zinc/Chromate coating GB/T 191-2000 Packaging—Pictorial marking for handling of goods GB/T 191-2008 Packaging—Pictorial marking for handling of goods GB/T 5171-2002 General technical requirements for small power motors GB/T 5171.1-2014 Small power motors—Part 1:General technical requirements GB/T 5171.21-2016 Small power motors—Part 21:General test methods GB/T 5171.22-2017 Small-power motors—Part 22:Test methods for permanent magnet brushless DC motors GB/T 191-2025 Graphical symbols marking for handling and storage of packages

Related Standards

GB 146.1-1983 Replaced

GB 146.1-1983 Rolling stock gauge for standard gauge railways

Publish Date: 1983-11-07

GB 12758-1991 Abolished

GB 12758-1991 Signal system for subway—General specification

Publish Date: 1991-03-26

GB/T 13669-1992 Active

GB/T 13669-1992 The limite of noise emitted by railbound locomotives

Publish Date: 1992-09-22

GB/T 15836.1-1995 Abolished

GB/T 15836.1-1995 Technical requirements and testing methods for 450MHz same-frequency simplex train radio dispatching communication equipment locomotive station

Publish Date: 1995-12-13

GB/T 15836.2-1995 Abolished

GB/T 15836.2-1995 Technical requirements and testing methods for 450MHz same-frequency simplex train radio dispatching communication equipment station radio set

Publish Date: 1995-12-13

GB/T 7178.1-1996 Replaced

GB/T 7178.1-1996 The operating standard for railway shunting Railway shunting basic regulations for the operating standard

Publish Date: 1996-03-15