GB/T 10261-1988
Replaced
GB/T 11813-2008
Active
National standards
GB/T 11813-2008 Helium leak testing of nuclear fuel rod for PWR
GB/T 11813-2008 Helium leak testing of nuclear fuel rod for PWR
Basic Information
Standard Code:
GB/T 11813-2008
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Nuclear fuel elements and their analysis and testing methods
ICS Name:
Nuclear energy engineering
Publish Date:
2008-07-02
Implement Date:
2009-04-01
Pages:
8 pages
Scope
This standard specifies the method of helium mass spectrometry leak detection for sealed performance of pressurized water reactor fuel rods (hereinafter referred to as "fuel rods"), as well as the calculation and determination of the detection results. This standard is applicable to the detection of the sealed performance of fuel rods, with a leak rate detection range of 1×10 -11 Pa·m3/s to 1×10 -7 Pa·m3/s. The helium mass spectrometry leak detection of pressurized water reactor control rods, combustible poison rods, neutron source rods, etc. can also be carried out in accordance with this standard.
Development Information
Replace the following standards
Referenced Standards
Related Standards
GB 10408.6-1991
Replaced
GB 10408.6-1991 Combination microwave and passive infrared intrusion detector
GB/T 4079-1994
Replaced
GB/T 4079-1994 Test procedures for amplifiers and charge-sensitive preamplifiers used with detectors of ionizing radiation
GB/T 15444-1995
Active
GB/T 15444-1995 Regulations for monitoring radioactivity in effluents from uranium processing and nuclear fuel fabrication facilities
GB/T 15474-1995
Replaced
GB/T 15474-1995 Safety classification of instrumentation and control systems and their electrical equipment of nuclear power plants
GB/T 4960.1-1996
Replaced