GB/T 5340-1985
Replaced
GB/T 37891.1-2019
Active
National standards
GB/T 37891.1-2019 Cutter arbors with parallel key and tenon drive—Part 1:General dimensions
GB/T 37891.1-2019 Cutter arbors with parallel key and tenon drive—Part 1:General dimensions
Basic Information
Standard Code:
GB/T 37891.1-2019
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Knives
ICS Name:
Milling cutter
Publish Date:
2019-08-30
Implement Date:
2020-03-01
Pages:
5 pages
Scope
This part of GB/T 37891 specifies the dimensions of the interface section of milling cutter rods with flat key and end key drives.
This part is applicable to milling cutter rods with flat key and end key drives.
Development Information
Same series standard
GB/T 37891.2-2019 Cutter arbors with parallel key and tenon drive—Part 2:Dimensions and designation of tool holders with hollow taper interface with flange contact surface
GB/T 37891.3-2019 Cutter arbors with parallel key and tenon drive—Part 3:Dimensions and designation of tool holders with 7/24 taper for automatic tool changers
GB/T 37891.4-2019 Cutter arbors with parallel key and tenon drive—Part 4:Dimensions and designation of tool holders with 7/24 taper without automatic tool changers
GB/T 37891.5-2019 Cutter arbors with parallel key and tenon drive—Part 5:Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
GB/T 37891.6-2019 Cutter arbors with parallel key and tenon drive—Part 6:Dimensions and designation of tool holders with modular taper interface with ball track system
Referenced Standards
GB/T 1184-1996 Geometrical tolerancing—Geometrical tolerance for features without individual tolerance indications
GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance indications
GB/T 20329-2006 Milling cutters with tenon drive—Interchangeability dimensions of the seating of the cutter on the arbors
GB/T 37895-2019 Dimensions of accessories for cutter arbors with parallel key and tenon drive
Adopt standards
ISO 10649-1:2013
Related Standards
GB/T 5341-1985
Replaced
GB/T 5341-1985 Side and facemilling cutters with indexable inserts
GB/T 5342-1985
Replaced
GB/T 5342-1985 Facemilling cutters with indexable inserts
GB/T 14298-1993
Replaced
GB/T 14298-1993 Helical end milling cutters with indexable inserts
GB/T 14301-1993
Replaced
GB/T 14301-1993 Solid carbide slitting cutters
GB/T 14328.1-1993
Replaced