GB/T 3457-1998
Replaced
GB/T 26023-2010
Active
National standards
GB/T 26023-2010 High precision tungsten plate of resisting ray
GB/T 26023-2010 High precision tungsten plate of resisting ray
Basic Information
Standard Code:
GB/T 26023-2010
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Rare high-melting-point metals and their alloys
ICS Name:
Non-ferrous metal products
Publish Date:
2011-01-10
Implement Date:
2011-10-01
Pages:
8 pages
Scope
This standard specifies the requirements, test methods, inspection rules, and marking, packaging, transportation, storage, and quality certificates for high-precision tungsten plates used in radiation protection, as well as the content of contracts (or purchase orders).
This standard applies to high-precision tungsten plates used in radiation protection, which are produced by rolling from powder metallurgy billets.
Development Information
Referenced Standards
GB/T 3850-1983 Impermeable sintered metal materials and hardmetals—determination of density
GB/T 3850-2015 Impermeable sintered metal materials and hardmetals—Determination of density
GB/T 4193-1984 Method for measuring the density of the fine wire and ribbon of tungsten and molybdenum used in electric light sources and vacuumtubes
GB/T 4324.1-2012 Methods for chemical analysis of tungsten—Part 1:Determination of lead content—Flame atomic absorption spectrometry
GB/T 4324.1-1984 Methods for chemical analysis of tungsten--The square wave polarographic method for the successive determination of lead and cadmium contents
GB/T 4324.2-2012 Methods for chemical analysis of tungsten—Part 2:Determination of bismuth content—Hydrogenate atomic absorption spectrometry
GB/T 4324.2-2023 Methods for chemical analysis of tungsten—Part 2:Determination of bismuth and arsenic contents
GB/T 4324.2-1984 Methods for chemical analysis of tungsten--The potassium iodide-brucine photometric method for thedetermination of bismuth content
GB/T 4324.3-2012 Methods for chemical analysis of tungsten—Part 3:Determination of tin content—Hydrogenate atomic absorption spectrometry
GB/T 4324.3-1984 Methods forchemical analysis of tungsten--The polyethylene glycol octyl phenylether-phenylfluorone photometric method for the determination of tin content
GB/T 4324.4-2012 Methods for chemical analysis of tungsten—Part 4:Determination of antimony content—Hydrogenate atomic absorption spectrometry
GB/T 4324.4-1984 Methods for chemical analysis of tungsten--The malachite green photometric method for the determination of antimony content
GB/T 4324.5-2012 Methods for chemical analysis of tungsten—Part 5:Determination of arsenic content—Hydrogenate atomic absorption spectrometry
GB/T 4324.5-1984 Methods for chemical analysis of tungsten--The molybdenum blue photometric method for the determination of arsenic content
GB/T 4324.6-2012 Methods for chemical analysis of tungsten—Part 6:Determination of iron content—1,10-phenanthroline spectrophotometry
GB/T 4324.6-1984 Methods for chemical analysisof tungsten--The ortho-phenanthroline photometric method for the determination iron content
GB/T 4324.7-2012 Methods for chemical analysis of tungsten—Part 7:Determination of cobalt content—Inductively coupled plasma atomic emission spectrometry
GB/T 4324.7-1984 Methods for chemical analysis of tungsten--The 5-Cl-PADAB photometric method for the determination of cobalt content
GB/T 4324.8-2008 Methods for chemical analysis of tungsten—Determination of nickel content—The inductively coupled plasma atomic emission spectrometry、flame atomic absorption spectrometry and dimethylglyoxime gravimetry
GB/T 4324.9-2012 Methods for chemical analysis of tungsten—Part 9:Determination of cadmium content—Inductively-coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
GB/T 4324.10-2012 Methods for chemical analysis of tungsten—Part 10:Determination of copper content—Flame atomic absorption spectrometry
GB/T 4324.10-1984 Methods for chemical analysis of tungsten--The neocuproine photometric method for the determination of copper content
GB/T 4324.11-2012 Methods for chemical analysis of tungsten—Part 11:Determination of aluminum content—Inductively coupled plasma atomic emission spectrometry
GB/T 4324.11-1984 Methods for chemical analysis oftungsten--The chromazurol S photometric method for the determination of aluminium content
GB/T 4324.12-2012 Methods for chemical analysis of tungsten—Part 12:Determination of silicon content—Chlorization-molybdenum blue spectrophotometry
GB/T 4324.12-1984 Methods for chemical analysisof tungsten--The chlorization-molybdenum blue photometric method for the determination of silicon content
GB/T 4324.13-2008 Methods for chemical analysis of tungsten—Determination of calcium content—The inductively coupled plasma atomic emission spectrometry
GB/T 4324.14-2012 Methods for chemical analysis of tungsten—Part 14:Determination of residue content after chloride volatility—Gravimetric method
GB/T 4324.15-2008 Methods for chemical analysis of tungsten—Determination of magnesium content—The flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry
GB/T 4324.16-2012 Methods for chemical analysis of tungsten—Part 16:Determination of loss content on ignition—Gravimetric method
GB/T 4324.17-2012 Methods for chemical analysis of tungsten—Part 17:Determination of sodium content—Flame atomic absorption spectrometry
GB/T 4324.17-1984 Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of sodium content
GB/T 4324.18-2012 Methods for chemical analysis of tungsten—Part 18:Determination of potassium content—Flame atomic absorption spectrometry
GB/T 4324.18-1984 Methods for chemical analysis of tungsten--The atomic absorption spectrophotometric method for the determination of potassium content
GB/T 4324.19-2012 Methods for chemical analysis of tungsten—Part 19:Determination of titanium content—The diantipyrylmethane photometric spectrophtometry
GB/T 4324.19-1984 Methods for chemical analysis of tungsten--The diantipyrylmethane photometric method for the determination of titanium content
GB/T 4324.20-2012 Methods for chemical analysis of tungsten—Part 20:Determination of vanadium content—Inductively coupled plasma atomic emission spectrometry
GB/T 4324.20-1984 Methods for chemical analysis of tungsten—The N-benzoyl-N-phenylhydroxylamine photometric method for the determination of vanadium content
GB/T 4324.21-2012 Methods for chemical analysis of tungsten—Part 21:Determination of chromium content—Inductively coupled plasma atomic emission spectrometry
GB/T 4324.21-1984 Methods for chemical analysis of tungsten--The diphenylcarbazide photometric method for the determination of chromium content
GB/T 4324.22-2012 Methods for chemical analysis of tungsten—Part 22:Determination of manganese content—Inductively coupled plasma atomic emission spectrometry
GB/T 4324.22-1984 Methods for chemical analysisof tungsten--The formaldoxime photometric method for manganese content
GB/T 4324.23-2012 Methods for chemical analysis of tungsten—Part 23:Determination of sulfur content—The combustion-conductometric titration and high frequency combustion-infrared absorption method
GB/T 4324.23-1984 Methods for chemical analysis of tungsten--The combustion-conductometric titration method for the determination of suphur content
GB/T 4324.24-2012 Methods for chemical analysis of tungsten—Part 24:Determination of phosphorus content—Molybdemum blue photometry
GB/T 4324.24-1984 Methods for chemical analysis of tungsten--The berylium as carrier precipitation agent-molybdenum blue photometric method for the determination of phosphorus content
GB/T 4324.25-2012 Methods for chemical analysis of tungsten—Part 25:Determination of oxygen content—Pulse heating inert gas fusion-infrared absorption method
GB/T 4324.25-1984 Methods for chemical analysis of tungsten--The inert gas fusion-coulometric titration method for the determination of oxygen content
GB/T 4324.26-2012 Methods for chemical analysis of tungsten—Part 26:Determination of nitrogen content—Pulse heating inert gas fusion-thermal conductive method and the Nessler reagent spectrophotometry
GB/T 4324.26-1984 Methods for chemical analysis of tungsten--The Nessler reagent photometric method for the determination of nitrogen content
GB/T 4324.27-2012 Methods for chemical analysis of tungsten—Part 27:Determination of carbon content—High frequency combustion-infrared absorption method
GB/T 4324.27-1984 Methods for chemical analysisof tungsten--The combustion-coulometric titration method for the determinationof carbon content
GB/T 4324.28-2012 Methods for chemical analysis of tungsten—Part 28:Determination of molybdenum content—The thioyanate spectrophotometry
GB/T 4324.28-1984 Methods for chemical analysis of tungsten--The thiocy anate photometric method for the determin-ation of molybdenum content
GB/T 4324.29-1984 Methods for chemical analysis of tungsten--The gravimetric method for the determination of residue content after chloride volatility
GB/T 4324.30-1984 Methods for chemical analysis of tungsten--The gravimetric method for the determination of loss content on ignition
GB/T 8170-1987 Rules for rounding off of numberical values
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
Related Standards
GB/T 6896-1998
Replaced
GB/T 6896-1998 Niobium bars
GB/T 17684-1999
Replaced
GB/T 17684-1999 The terminology for precious metals and their alloys
GB/T 8888-2003
Replaced
GB/T 8888-2003 Wrought heavy non-ferrous metal products-Packing,marking,transporting and storing
YS/T 632-2007
Replaced
YS/T 632-2007 Low grade blister
GB/T 3460-2007
Replaced