GB 4505-1984
Abolished
YY/T 0093-2004
Replaced
Industry standards-Medicine
YY/T 0093-2004 Medical diagnostic X-ray image intensifier
YY/T 0093-2004 Medical diagnostic X-ray image intensifier
Basic Information
Standard Code:
YY/T 0093-2004
Standard Type:
Industry standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Medical radiation equipment
ICS Name:
X-ray imaging equipment
Publish Date:
2004-11-08
Implement Date:
2005-11-01
Pages:
20 pages
Scope
This standard specifies the requirements, test methods, inspection rules, marking, user manuals, packaging, transportation, and storage for medical X-ray image intensifiers (hereinafter referred to as image intensifiers). This standard applies to image intensifiers equipped with image-shrinking X-ray image intensifier tubes with a nominal incident field of 15 cm (6 in), 23 cm (9 in), 30 cm (12 in), and 40 cm (16 in), including single-field and multi-field models. These products are primarily used in medical diagnostic X-ray equipment. This standard does not apply to flat-panel or other types of image intensifiers.
Development Information
Replace the following standards
YY 0093-1992
Superseded by the following standards
Referenced Standards
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
GB 9706.1-1995 Medical electrical equipment—Part 1:General requirements for safety
GB 9706.12-1997 Medical electrical equipment—Part 1:General requirements for safety 3.collateral standard:General requirements for radiation protection in diagnostic X-ray equipment
GB 9969.1-1998 General principles for preparation of instructions for use of industrial products
\nYY/T 0076-1992 Classification of Coatings on Metal Parts and Technical Requirements
YY/T 0457.1-2003 Medical electrical equipment—Characteristics of electro-optical X-ray image intensifiers—Part 1:Determination of the entrance field size
YY/T 0457.2-2003 Medical electrical equipment—Characteristics of electro-optical X-ray image intensifiers—Part 2:Determination of the conversion factor
YY/T 0457.3-2003 Medical electrical equipment—Characteristics of electro-optical X-ray image intensifiers—Part 3:Determination of the luminance distribution and luminance non-uniformity
YY/T 0457.4-2003 Medical electrical equipment—Characteristics of electro-optical X-ray image intensifiers—Part 4:Determination of the image distortion
YY/T 0457.6-2003 Medical electrical equipment—Characteristics of electro-optical X-ray image intensifiers—Part 6:Determination of the contrast ratio and veiling glare index
YY/T 91055-1999
YY/T 91099-1999
YY/T 0291-1997 The environmental requirements and testing methods for medical X-ray equipment
Related Standards
GB 5579-1985
Abolished
GB 5579-1985 High-voltage cable plug and socket connections for medical X-ray equipment
GB 5665-1985
Abolished
GB 5665-1985 General specification for mechanical units of medical diagnostic X-ray equipment
GB 10151-1988
Abolished
GB 10151-1988 Medical X-ray equipment—Specification for high voltage cable plug and socket connections
GB/T 10149-1988
Active
GB/T 10149-1988 Terminology and symbol for medical X-ray equipment
GB 11239-1989
Replaced