MT 644-1997
Active
NB/T 11106-2023
Active
Industry standards-Energy
NB/T 11106-2023 Technical requirements for unattended monitoring and control system of underground power supply in coal mine
NB/T 11106-2023 Technical requirements for unattended monitoring and control system of underground power supply in coal mine
Basic Information
Standard Code:
NB/T 11106-2023
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Special equipment and supplies for coal mines
ICS Name:
Other mining equipment
Publish Date:
2023-02-06
Implement Date:
2023-08-06
Pages:
16 pages
Scope
This document specifies the general requirements, system structure and configuration, functional requirements, safety protection, performance requirements, and technical conditions for the unattended monitoring system of power supply in coal mines.
This document is applicable to the design, construction, equipment development, and acceptance of unattended monitoring systems for power supply in coal mines with voltage levels of 10 kV and below.
Development Information
Referenced Standards
GB/T 15663.11-2008 Terms relating to coal mining—Part 11:Coal mining electrical engineering
DL/T 667
DL/T 5149-2020
电力监控系统安全防护规定(中华人民共和国国家发展和改革委员会〔2014〕第14号令)
GB/T 2887-2000 Specification for electronic computer field
GB/T 2887-2011 General specification for computer field
DL/T 634.5104-2009 Transmission equipment and systems Part 5-104: Transmission protocol specifications using IEC 60870-5-101 network access with standard transmission protocol set
DL/Z 860.1-2018 DL/Z 860.1-2018 Electric power automation communication networks and systems Part 1: General introduction
DL/Z 860.1-2004 Substation communication networks and systems - Part 1: General introduction
DL/T 860.4-2018 Electric power automation communication networks and systems - Part 4: Systems and project management
DL/T 860.6-2012 DL/T 860.6-2012 Electric Power Enterprise Automation Communication Network and System Part 6: Communication Configuration Description Language Related to Intelligent Electronic Devices in Substation
DL/T 860.10-2018 Part 10 of the guidelines for electric power automation communication networks and systems: Conformance testing
DL/T 860.10-2006 Substation communication networks and systems - Part 10: Conformance testing
DL/T 860.71-2014 Power automation communication networks and systems - Part 7-1: Basic communication architecture principles and models
DL/T 860.72-2013 Power automation communication networks and systems - Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI)
DL/T 860.73-2013 Power automation communication networks and systems - Part 7-3: Basic communication structure for public data classes
DL/T 860.74-2014 Electric power automation communication networks and systems - Part 7-4: Basic communication structure compatible logical node classes and data classes
DL/T 860.81-2016 DL/T 860.81-2016 Electricity automation communication network and system Part 8-1: Specific communication service mapping (SCSM) - Mapping to MMS (ISO 9506-1 and ISO 9506-2) and ISO/IEC 8802-3
DL/T 860.91-2006 Substation communication networks and systems - Part 9-1: Mapping of specific communication services (SCSM) on a unidirectional multipoint point-to-point serial communication link for sampled values
DL/T 860.92-2016 Electric power automation communication networks and systems - Part 9-2: Specific communication service mapping (SCSM) - Sampling values based on ISO/IEC 8802-3
DL/T 860.801-2016 Electric power automation communication networks and systems - Part 80-1: Application guidelines for exchanging information based on CDC data model using DL/T 634.5101 or DL/T 634.5104 switching system
DL/T 860.901-2014 Power automation communication network and system Part 901: Application of DL/T 860 in inter-substation communication. (Note: English translation provided)
DL/T 860.904-2018 Power automation communication networks and systems - Part 90-4: Network engineering guidelines
DL/T 860.7410-2016 Power Automation Communication Networks and Systems Part 7-410: Basic Communication Architecture for Monitoring and Control of Hydropower Plants
DL/T 860.7420-2012 Electricity enterprise automation communication network and system Part 7-420: Basic communication structure Distributed energy logic nodes
DL/Z 860.7510-2016 Power Automation Communication Networks and Systems Part 7-510: Basic Communication Architecture, Hydropower Plant Modeling Principles and Application Guidelines
DL/T 1230
DL/T 1512-2016 Substation measurement and control device technical specification
DL/T 1708-2017 Power system sequence control technical specification
NB/T 10051-2018 Coal mine power supply anti-jump system
DL/T 634.5104-2002 Remote-control equipment and systems Part 5-104: Transmission protocols using the IEC 60870-5-101 network access subset for standard transmission protocol
DL/Z 860.2-2006 Substation communication networks and systems - Part 2: Terminology
DL/T 860.4-2004 Substation communication networks and systems - Part 4: System and project management
DL/T 860.6-2008 Substation communication network and system - Part 6: Communication configuration description language related to intelligent electronic devices in substation
DL/T 860.71-2006 Substation communication networks and systems - Part 7-1: Basic communication architecture and models for substation and feeder equipment
DL/T 860.72-2004 Substation communication networks and systems - Part 7-2: Basic communication structure for substation and feeder equipment - Abstract communication service interface (ACSI)
DL/T 860.73-2004 Substation communication networks and systems - Part 7-3: Basic communication structure for substation and feeder equipment - Public data classes
DL/T 860.74-2006 Substation communication networks and systems - Part 7-4: Basic communication structure for substation and feeder equipment - Compatibility of logical node classes and data classes
DL/T 860.81-2006 Substation Communication Network and System Part 8-1: Mapping of Specific Communication Services (SCSM) to MMS (ISO 9506-1 and ISO 9506-2) and ISO/IEC 8802-3
DL/T 860.92-2006 Substation communication networks and systems - Part 9-2: Mapping of specific communication services mapping (SCSM) to ISO/IEC 8802-3 to sample values only
DL/T 1230-2013 DL/T 1230-2013 Specification for Graphic Representation of Power System。
DL/T 860.3-2004 Communication networks and systems in substations-Part 3:General requirements
DL/T 1230-2016 Power System Graphic Specification Language
Related Standards
MT 646-1997
Abolished
MT 646-1997 Frictional metal prop
MT 668-1997
Replaced
MT 668-1997 Technical Conditions for Flame-Retardant Steel-Mesh-Core Conveying Belt for Coal Mines
MT 669-1997
Active
MT 669-1997 Technical condition of fire-resistant steel-cable conveyor-belt in coal mining
MT/T 154.7-1997
Active
MT/T 154.7-1997 Model designation of separating equipment for coal
MT/T 660-1997
Active