DZ/T 0101.12-1994
Active
CJ/T 218-2005
Replaced
Industry standards-Urban construction
CJ/T 218-2005 Pipe and fittings of Acrylic ester/vinyl chloride graft co-polymer resin for water supply
CJ/T 218-2005 Pipe and fittings of Acrylic ester/vinyl chloride graft co-polymer resin for water supply
Basic Information
Standard Code:
CJ/T 218-2005
Standard Type:
Industry standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
-
ICS Name:
-
Publish Date:
2005-12-30
Implement Date:
2006-03-01
Pages:
20 pages
Scope
This standard specifies the terms, materials, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of acrylic copolymer polyvinyl chloride pipes and fittings (hereinafter referred to as pipes and fittings) for water supply.
This standard applies to acrylic copolymer polyvinyl chloride water supply piping systems where the water temperature does not exceed 45°C and the nominal pressure does not exceed 1.6 MPa.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 1033-1986 Test method for density and relative density of plastics
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2918-1998 Plastics—Standard atmospheres for conditioning and testing
GB/T 4615-1984 Determination method of residual vinyl chloride monomer contents in polyvinyl chloride
GB/T 6111-2003 Thermoplastics pipes for the conveyance of fluids-Resistance to internal pressure—Test method
GB/T 8802-2001 Thermoplastics pipes and fitting-Determination of vicat softening temperature
GB/T 8803-2001 Injection-moulded unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C),acrylonitrile butadiene-styrene(ABS)and acrylonitrile-styrene-acrylester(ASA)fittings—Hot oven test method
GB/T 8804.2-2003 Thermoplastic pipes—Determination of tensile properties—Part 2:Pipes made of unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C)and high-impact poly(vinyl chloride)(PVC-HI)
GB/T 9645-1988
GB/T 14152-2001 Thermoplastics pipes—Determination of resistance to external blows—Round-the-clock method
GB/T 17219-1998 Standard for safety evaluation of equipment and protective materials in drinking water system
GB/T 6671-2001 Thermoplastics pipes-Determination of longitudinal reversion
GB/T 8801-2007 Test method for unplasticized polyvinyl chloride(PVC-U)fittings by falling
GB/T 8806-2008 Plastics piping systems—Plastics components—Determination of dimensions
GB/T 10002.1-1996 Unplasticized polyvinyl chloride (PVC-U) pipe for water supply
GB/T 10002.1-2006 Unplasticized poly(vinyl chloride)(PVC-U)pipes for water supply
GB/T 10002.1-2023 Unplasticized poly (vinyl chloride) (PVC-U) pipes for water supply
GB/T 10002.2-2003 Fittings made of unplasticized poly(vinyl chloride)(PVC-U)for water supply
GB/T 10002.2-2023 Unplasticized poly(vinyl chloride)(PVC-U)fittings for water supply
GB/T 13526-1992 Unplasticized polyvinyl chloride (PVC-U) pipes—Dichloromethane test
GB/T 13526-2007 Unplasticized polyvinyl chloride(PVC-U) pipes—Dichloromethane resistance test method
GB/T 8805-1988 Determination of deflection for rigid plastic pipes
GB/T 8806-1988 Method for dimension measuring of plastic pipes
Related Standards
JJG 204-1980
Active
JJG 204-1980 Meteorological Ventilation Psychrometer
SC 53-1980
Active
SC 53-1980 Transfer blade hydraulic steering gear repair quality standard
DZ 4-1981
Replaced
DZ 4-1981
SC 69-1982
Active
SC 69-1982 ZSS-12 Flash-type seawater desalination production device technical specifications
SC 72-1982
Active