GB/T 39248-2020
Active
National standards
GB/T 39248-2020 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons,solvents and chemicals—Specification
GB/T 39248-2020 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons,solvents and chemicals—Specification
Basic Information
Standard Code:
GB/T 39248-2020
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Rubber hoses, adhesive tapes, and rubber cloths
ICS Name:
Petroleum, petroleum products, and natural gas storage and transportation equipment
Publish Date:
2020-11-19
Implement Date:
2021-10-01
Pages:
24 pages
Scope
This standard specifies the requirements for two types of thermoplastic multilayer (non-vulcanized) hoses and hose assemblies used for transporting liquefied petroleum gas and liquefied natural gas. Each type is divided into two categories: one for onshore use, and the other for offshore use:
——Category A is for onshore use;
——Category B is for offshore use.
This standard applies to thermoplastic multilayer (non-vulcanized) hoses and hose assemblies with an inner diameter of 25 mm to 300 mm, a working pressure of 1.05 MPa to 2.5 MPa, and a working temperature range of -196 ℃ to +45 ℃.
Note: Offshore liquefied natural gas hose assemblies are also specified in EN 1472-2.
Development Information
Referenced Standards
GB/T 5563-2013 Rubber and plastics hoses and hose assemblies—Hydrostatic testing
GB/T 9572-2013 Rubber and plastics hoses and hose assemblies—Determination of electrical resistance and conductivity
GB/T 24134-2009 Rubber and plastics hoses—Assessment of ozone resistance under static conditions
ISO 148-1
ISO 527-1
ISO 4671
ISO 8330
ISO 1043-1
ISO 10619-1
ISO 10619-2
ISO 13934-1
ISO 16143-3
EN 10088-3
Adopt standards
ISO 27127:2014
Related Standards
GB 13236-1991
Replaced
GB/T 16544-1996
Replaced
GB/T 16544-1996 Spherical tank—Radiographic method of gamma ray panoramic exposure
GB/T 9711.2-1999
Replaced
GB/T 9711.2-1999 Petroleum and natural gas industries—Steel pipe for pipelines—Technical delivery conditions—Part 2:Pipes of requirement class B
GB/T 9081-2001
Replaced
GB/T 9081-2001 Fuel dispensers for motor vehicles
GB/T 10546-2003
Replaced
GB/T 10546-2003 Rubber hoses and hose assemblies for liquefied petroleum gases(LPG)—Bulk transfer application
GB/T 9711.3-2005
Replaced