YY/T 0583.1-2015
Active
Industry standards-Medicine
YY/T 0583.1-2015 Chest drainage systems for single use—Part 1:Type of water-seal
YY/T 0583.1-2015 Chest drainage systems for single use—Part 1:Type of water-seal
Basic Information
Standard Code:
YY/T 0583.1-2015
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Extracorporeal circulation, artificial organs, and prosthetic devices
ICS Name:
Surgical implants, prostheses, and orthoses
Publish Date:
2015-03-02
Implement Date:
2016-01-01
Pages:
25 pages
Scope
This part of YY/T 0583 specifies the requirements for aseptically supplied water-sealed disposable thoracic drainage devices (referred to as drainage devices). The device can be used for gravity drainage or connected to a negative pressure suction system to achieve suction drainage.
The requirements for the autologous blood reinfusion system on thoracic drainage catheters inserted into the patient's thoracic cavity, dry-sealed thoracic drainage devices, and thoracic drainage devices with autologous blood reinfusion systems are not included in this part.
Drainage devices intended for patient carrying are not applicable to this part.
Development Information
Replace the following standards
Referenced Standards
GB/T 14233.1-2008 Test methods for infusion,transfusion,injection equipments for medical use—Part 1:Chemical analysis methods
ISO 11607-1:2006
GB 15810-2001 Sterile hypodermic syringes for single use
GB 15810-2019 Sterile syringes for single use
YY/T 0466.1-2009 Medical devices—Symbols to be used with medical device labels, labelling and information to be supplied—Part 1:General requirements
YY/T 0466.1-2016 Medical devices—Symbols to be used with medical device labels,labelling and information to be supplied—Part 1:General requirements
YY/T 0466.1-2023 Medical devices—Symbols to be used with information to be supplied by the manufacturer—Part 1:General requirements
Related Standards
GB 12264-1990
Replaced
GB 12279-1990
Replaced
GB 12279-1990 Cardiac valve prostheses general technical specification
GB 12417-1990
Replaced
GB 12417-1990 The general technological conditions of surgical metal implant
GB/T 13461-1992
Replaced
GB/T 13461-1992 Synthetic resin blow knee prostheses
GB/T 14191-1993
Replaced
GB/T 14191-1993 Terminology for prosthetics and orthotics
GB 14722-1993
Replaced