T/AHLB 009-2024 Basketware Furniture

Scope

Scope: This document specifies the terms and definitions, product classification, requirements, inspection methods, inspection rules, and marking, packaging, transportation, and storage for willow-woven furniture. This document applies to willow-woven furniture primarily made from willow strips, produced by traditional handmade or semi-handmade methods. Main technical content: Table 1: Surface physical and chemical properties Serial number Test item Test conditions and requirements Product classification Basic General 1 Liquid resistance of the paint film 10% sodium carbonate solution, 24h; 10% acetic acid solution, 24h. Should not be lower than Grade 3 2 Moisture resistance 20min, 70℃, should not be lower than Grade 3 3 Dryness resistance 20min, 70℃, should not be lower than Grade 3 4 Adhesion Coated layer cross-cutting test, should not be lower than Grade 3 5 Resistance to cold and heat 3 cycles, should not have bubbling, cracks, or obvious fading 6 Resistance to abrasion Grind 1000r, should not be lower than Grade 3 7 Resistance to impact Impact height 50mm, should not be lower than Grade 3 8 Resistance to cigarette burning No black spots, cracks, or bubbling 9 Resistance to cold and heat cycles No cracks, cracking, wrinkling, or bubbling 10 Resistance to dry heat No cracking or bubbling 11 Resistance to scratching Load 1.5N, no continuous scratches around the surface 12 Liquid resistance 10% sodium carbonate solution, 24h; 10% acetic acid solution, 24h, should not be lower than Grade 3 13 Surface abrasion resistance Pattern abrasion after 100r, should not have exposed backing Color abrasion after 350r, should not have exposed backing 14 Resistance to cigarette burning No black spots, cracks, or bubbling 15 Resistance to impact Impact height 50mm, should not be lower than Grade 3 16 Lightfastness Grade ≥4 Table 2: Mechanical properties S

Development Information

Related Standards