YY/T 0197.5-2007 Active Industry standards-Medicine

YY/T 0197.5-2007 X-ray tube for medical diagnosis XD51-20、40/100 and XD51-20、40/125 rotating anode X-ray tube

YY/T 0197.5-2007 X-ray tube for medical diagnosis XD51-20、40/100 and XD51-20、40/125 rotating anode X-ray tube

Publish Date: 2007-01-31 Implement Date: 2008-01-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: YY/T 0197.5-2007

Standard Type: Industry standards

Standard Status: Active

is_force_gb: no

CCS Name: Medical radiation equipment

ICS Name: X-ray imaging equipment

Publish Date: 2007-01-31

Implement Date: 2008-01-01

Pages: 9 pages

Scope

This part of YY/T 0197 specifies the terms and definitions, requirements, test methods, inspection rules, and marking, packaging, transportation, and storage for XD51-20, 40/100, and XD51-20, 40/125 medical diagnostic rotating anode X-ray tubes. This part is applicable to XD51-20, 40/100, and XD51-20, 40/125 medical diagnostic rotating anode X-ray tubes (referred to as X-ray tubes), which are made of glass and are mainly used in conjunction with medical diagnostic X-ray machines.

Development Information

Word Count: 16 Thousand words Pages: 9 pages

Same series standard

YY/T 0197.1-2007 X-ray tube for medical diagnosis—XD1-3/100 stationary anode X-ray tube YY/T 0197.2-2007 X-ray tube for medical diagnosis—XD2-1/85 stationary anode X-ray tube YY/T 0197.3-2007 X-ray tube for medical diagnosis XD3-3.5/100 stationary anode X-ray tube YY/T 0197.4-2007 X-ray tube for medical diagnosis XD4-2、9/100 stationary anode X-ray tube

Replace the following standards

YY 0197.5-1995

Referenced Standards

GB/T 191-2000 Packaging—Pictorial marking for handling of goods GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance indications GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability) GB 9706.1-1995 Medical electrical equipment—Part 1:General requirements for safety GB 9706.11-1997 Medical electrical equipment—Part 2:Particular requirements for the safety of X-ray source assemblies and X-ray tube assemblies for medical diagnosis GB 9969.1-1998 General principles for preparation of instructions for use of industrial products GB/T 10149-1988 Terminology and symbol for medical X-ray equipment GB/T 12078-1989 Generic specification for X-ray tubes GB/T 12079-1989 Measurements of the photoelectric properties for X-ray tubes YY/T 0062-2004 Determination of the permanent filtration of X-ray tube assemblies YY/T 0063-2007 Medical electrical equipment—X-ray tube assemblies for medical diagnosis—Characteristics of focal spots

Related Standards

GB 4505-1984 Abolished

GB 4505-1984 The general specifications on medical diagnostic X-ray generating unit

Publish Date: 1984-06-22

GB 5579-1985 Abolished

GB 5579-1985 High-voltage cable plug and socket connections for medical X-ray equipment

Publish Date: 1985-10-31

GB 5665-1985 Abolished

GB 5665-1985 General specification for mechanical units of medical diagnostic X-ray equipment

Publish Date: 1985-11-30

GB 10151-1988 Abolished

GB 10151-1988 Medical X-ray equipment—Specification for high voltage cable plug and socket connections

Publish Date: 1988-12-22

GB/T 10149-1988 Active

GB/T 10149-1988 Terminology and symbol for medical X-ray equipment

Publish Date: 1988-12-22

GB 11239-1989 Replaced

GB 11239-1989 The operation microscope

Publish Date: 1989-03-31