YC/T 10.5-2018 Active Industry standards-Tobacco

YC/T 10.5-2018 Tobacco machinery—General requirements—Part 5:Spheroidal graphite iron castings

YC/T 10.5-2018 Tobacco machinery—General requirements—Part 5:Spheroidal graphite iron castings

Publish Date: 2018-04-03 Implement Date: 2018-04-15 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: YC/T 10.5-2018

Standard Type: Industry standards

Standard Status: Active

is_force_gb: no

CCS Name: Tobacco-making machinery

ICS Name: Tobacco, tobacco products, and tobacco industry equipment

Publish Date: 2018-04-03

Implement Date: 2018-04-15

Pages: 5 pages

Scope

This part of YC/T 10 specifies the technical requirements, test methods, and inspection rules for nodular cast iron parts (hereinafter referred to as castings) of tobacco machinery.
This part is applicable to ordinary and low-alloy nodular cast iron parts cast in sand molds (or molds with thermal conductivity equivalent to sand molds) for tobacco machinery products. Nodular cast iron parts made by special casting methods can be used as reference.
This part is not applicable to nodular cast iron pipe parts and continuously cast nodular cast iron parts.

Development Information

Word Count: 1 Thousand words Pages: 5 pages

Same series standard

YC/T 10.1-2018 Tobacco machinery—General requirements—Part 1:Machinings YC/T 10.2-2018 Tobacco machinery—General requirements—Part 2:Cold working YC/T 10.3-2018 Tobacco machinery—General requirements—Part 3:Weldings YC/T 10.4-2018 Tobacco machinery—General requirements—Part 4:Grey iron castings YC/T 10.6-2018 Tobacco machinery—General requirements—Part 6:Carbon steel castings YC/T 10.7-2018 Tobacco machinery—General requirements—Part 7:Copper alloy castings YC/T 10.8-2018 Tobacco machinery—General requirements—Part 8:Aluminium alloy castings YC/T 10.9-2018 Tobacco machinery—General requirements—Part 9:Forgings YC/T 10.10-2018 Tobacco machinery—General requirements—Part 10:Plating and chemical-treating metal parts YC/T 10.11-2018 Tobacco machinery—General requirements—Part 11:Painting YC/T 10.12-2018 Tobacco machinery-General requirements—Part 12:Assembling YC/T 10.13-2018 Tobacco machinery—General requirements—Part 13:Packing YC/T 10.14-2018 Tobacco machinery—General requirements—Part 14:Electrical control system YC/T 10.15-2018 Tobacco machinery—General requirements—Part 15:Electrical control system YC/T 10.16-2018 Tobacco machinery—General requirements—Part 16:Polishing and wire-drawing of the stainless steel parts

Replace the following standards

YC/T 10.5-2006 Tobacco machinery—General requirements—Part 5:Spheroidal graphite iron castings

Referenced Standards

GB/T 1348-2009 Spheroidal graphite iron castings GB/T 6060.1-1997 Roughness comparison specimens—Cast surfaces GB/T 6414-2017 Castings—Dimensional tolerances and geometrical tolerances and machining allowances GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature JB/T 5105-2022 Casting pattern Draft for removal JB/T 5105-1991

Related Standards

GB 8966-1988 Replaced

GB 8966-1988 Burley tobacco

Publish Date: 1988-03-31

GB 2635-1992 Active

GB 2635-1992 Flue-cured tobacco

Publish Date: 1992-08-15

GB 15269-1994 Replaced

GB 15269-1994 Cigar

Publish Date: 1994-11-23

GB 15699-1995 Replaced

GB 15699-1995 Rules for tobacco seed (blue mold) quarantine

Publish Date: 1995-08-28

GB/T 16447-1996 Replaced

GB/T 16447-1996 Tobacco and tobacco products—Atmosphere for conditioning and testing

Publish Date: 1996-04-17

GB/T 16448-1996 Replaced

GB/T 16448-1996 Rule for name of tobacco cultivar

Publish Date: 1996-04-17