GB/T 25672-2010 Replaced National standards

GB/T 25672-2010 Hammer drills and shell hammer drills

GB/T 25672-2010 Hammer drills and shell hammer drills

Publish Date: 2010-12-23 Implement Date: 2011-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 25672-2010

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Knives

ICS Name: Drill, reamer, and hobbing cutter

Publish Date: 2010-12-23

Implement Date: 2011-07-01

Pages: 13 pages

Scope

This standard specifies the basic requirements for electric hammer drills and casing electric hammer drills, including their types and sizes, appearance and surface roughness, positional tolerances, materials and hardness, marking, and packaging.
This standard applies to electric hammer drills with a diameter of 5 mm to 50 mm used for drilling in materials such as concrete and bricks free from metal inclusions, as well as casing electric hammer drills with a diameter of 25 mm to 150 mm used for drilling in materials such as bricks, blocks, and lightweight walls.

Development Information

Word Count: 22 Thousand words Pages: 13 pages

Superseded by the following standards

GB/T 25672-2021 Hammer drill bit and shell hammer drill bit

Referenced Standards

GBJ 107 GB/T 3478.1-1995 Straight cylindrical involute splines—Modules, basic rack profiles and tolerances GB/T 3478.1-2008 Straight cylindrical involute splines—Metric module,side fit—Part 1:Generalities GB/T 18376.2-2001 Grades of cemented carbide Part 2:grades of cemented carbide for geological and mining tools GB/T 18376.2-2014 Grades of cemented carbide—Part 2:Grades of cemented carbide for geological and mining tools GB/T 18376.2-2024 Grades of cemented carbide—Part 2:Grades of cemented carbide for rock drilling and engineering

Related Standards

GB/T 4267-1984 Replaced

GB/T 4267-1984 Rotating tools with parallel shanks—Diameters of shanks and sizes of driving squares

Publish Date: 1984-03-28

GB/T 14299-1993 Replaced

GB/T 14299-1993 Spiral flute drill with indexable inserts

Publish Date: 1993-04-17

GB/T 14332-1993 abolished_transferred

GB/T 14332-1993 Ejector drills with carbide tips

Publish Date: 1993-04-17

GB/T 1438.1-1996 Replaced

GB/T 1438.1-1996 Taper shank twist drills—Part 1:The types and dimensions for Morse taper shank twist drills

Publish Date: 1996-07-05

GB/T 1438.2-1996 Replaced

GB/T 1438.2-1996 Taper shank twist drills—Part 2:The types and dimensions for long Morse taper shank twist drills

Publish Date: 1996-07-05

GB/T 1438.3-1996 Replaced

GB/T 1438.3-1996 Taper shank twist drills—Part 3:The types and dimensions for lengthened Morse taper shank twist drills

Publish Date: 1996-07-05