GB/T 16934-1997
Replaced
JG/T 417-2013
Active
Industry standards-The construction industry
JG/T 417-2013 Shunt active power filtering equipment for electrical installation of buildings
JG/T 417-2013 Shunt active power filtering equipment for electrical installation of buildings
Basic Information
Standard Code:
JG/T 417-2013
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Power supply and distribution engineering
ICS Name:
The power supply system
Publish Date:
2013-09-29
Implement Date:
2014-02-01
Pages:
20 pages
Scope
This standard specifies the terms and definitions, classification, code and marking, technical requirements, test methods, inspection rules, marking and nameplates, packaging, transportation, and storage of parallel active power filter devices used in building electrical systems.
This standard applies to civil and general industrial building power distribution systems, with a frequency of 50 Hz and a rated working voltage of no more than 1,000 (or 1,140) V for parallel active power filter devices (hereinafter referred to as devices).
Development Information
Referenced Standards
GB/T 3797-2005 Electrical control assemblies
GB 7251.1-2005 Low-voltage switchgear and control gear assemblies—Part 1:Type-tested and partially type-tested assemblies
GB/T 14549-1993 Quality of electric energy supply—Harmonics in public supply network
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 2900.1-1992 Electrotechnical terminology—Fundamental terms
GB/T 2900.1-2008 Electrotechnical terminology—Fundamental terms
GB/T 2900.33-1993 Electrotechnical terminology—Power electronics
GB/T 2900.33-2004 Electrotechnical terminoligy—Power electronics
GB/T 4025-2003 Basic and safety principles for man-machine interface, marking and identification Coding principles for indication devices and actuators
GB/T 4025-2010 Basic and safety principles for man-machine interface,marking and identification—Coding principles for indicators and actuators
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 4588.1-1996 Sectional specification:single and double sided printed boards with plain holes
GB/T 4588.2-1996 Sectional specification:single and double sided printed boards with plated-through holes
GB 7947-1997 Identification of conductors by colors or numerals
GB 7947-2006 Basic and safety principles for man-machine interface, marking and identification—Identification of conductors by colors or numerals
GB/T 7947-2010 Basic and safety principles for man machine interface,marking and identification—Identification of conductors by colours or alphanumerics
GB/T 13384-1992 General specifications for packagings of mechanical and electrical products
GB/T 13384-2008 General specifications for packing of mechanical and electrical product
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
GB 16895.5-2000
Replaced
GB 16895.5-2000 Electrical installations of buildings—Part 4:Protection for safety—Chapter 43:Protection against over current
GB 16895.6-2000
Replaced
GB 16895.6-2000 Electrical installations of buildings—Part 5:Selection and erection of electric equipment—Chapter 52:Wiring systems
GB 16895.7-2000
Replaced
GB 16895.7-2000 Electrical installations of buildings Part 7:Requirements for special installations or locations Section 704:Construction and demolition site installations
GB 16895.8-2000
Replaced
GB 16895.8-2000 Electrical installations of buildings—Part 7:Requirements for special installations or location—Section 706:Restrictive conducting locations
GB/T 16895.9-2000
Active