GB/T 25379.2-2010 Active National standards

GB/T 25379.2-2010 Modular units for machine tools—Workholding pallets—Part 2:Workholding pallets of nominal size greater than 800 mm

GB/T 25379.2-2010 Modular units for machine tools—Workholding pallets—Part 2:Workholding pallets of nominal size greater than 800 mm

Publish Date: 2010-11-10 Implement Date: 2011-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 25379.2-2010

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Machine tool parts

ICS Name: The indexing and tool/workpiece clamping devices

Publish Date: 2010-11-10

Implement Date: 2011-03-01

Pages: 17 pages

Scope

This part of GB/T 25379 specifies the dimensions of the workpiece accompanying pallets (hereinafter referred to as pallets) used in machine tools.
This part is applicable to square pallets with nominal dimensions of 1,000 mm, 1,250 mm, 1,600 mm, and 2,000 mm, as well as rectangular pallets with a length-to-width ratio of 1.25.

Development Information

Word Count: 32 Thousand words Pages: 17 pages

Same series standard

GB/T 25379.1-2010 Modular units for machine tools—Workholding pallets—Part 1:Workholding pallets up to 800 mm nominal size

Referenced Standards

GB/T 158-1996 Machine tool tables—T-slots and corresponding bolts GB/T 1182-2008 Geometrical Product Specifications(GPS)—Geometrical tolerancing—Tolerances of form, orientation, location and run-out GB/T 1800.4-1999 Limits and fits Tables of standard tolerance grades and limit deviations for holes and shafts GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance indications

Adopt standards

ISO 8526-2:1990

Related Standards

GB/T 2804-1981 Replaced

GB/T 2804-1981 Modular parts of fixture construction—General features, profiles and dimensions

Publish Date: 1981-11-17

GB/T 14661-1993 Replaced

GB/T 14661-1993 Type A cartridges for indexable inserts

Publish Date: 1993-10-15

GB/T 2554.1-1998 Replaced

GB/T 2554.1-1998 Mechanical dividing heads—Testing of accuracy

Publish Date: 1998-11-18

GB/T 2554.2-1998 Replaced

GB/T 2554.2-1998 Mechanical dividing heads—Classifications and technical specifications

Publish Date: 1998-11-18

GB/T 3837-2001 Active

GB/T 3837-2001 7/24 tapers for tool shanks for manual changing

Publish Date: 2001-07-20

GB/T 4346.1-2002 Replaced

GB/T 4346.1-2002 Self-centring manually-operated chucks for machine tools—Part 1:Dimensions and specifications

Publish Date: 2002-09-13