GB 440-1977
Active
GB/T 20420-2006
Active
National standards
GB/T 20420-2006 Lubricants,industrial oils and related products(class L)—Family E(internal combustion engine oils)—Specifications for two-stroke-cycle gasoline engine oils (categories EGB,EGC and EGD)
GB/T 20420-2006 Lubricants,industrial oils and related products(class L)—Family E(internal combustion engine oils)—Specifications for two-stroke-cycle gasoline engine oils (categories EGB,EGC and EGD)
Basic Information
Standard Code:
GB/T 20420-2006
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Lubricating oil
ICS Name:
Lubricants, industrial oils, and related products
Publish Date:
2006-07-18
Implement Date:
2007-01-01
Pages:
8 pages
Scope
This standard specifies the requirements and test methods, inspection rules, and marking, packaging, transportation, and storage for two-stroke gasoline engine oils made from high-viscosity index base oils and various additives. The lubricating oil referred to in this standard (hereinafter referred to as two-stroke gasoline engine oil) is suitable for two-stroke spark-ignition gasoline engines with a crankcase scavenging system and is used for lubricating related machinery such as motorcycles, snowmobiles, and chainsaws in transportation, leisure, and other applications. According to the definition of GB/T 7631.17, the products covered by this standard are divided into three grades: EGB, EGC, and EGD. This standard covers all grades that define the performance requirements of two-stroke gasoline engine oils.
Development Information
Referenced Standards
GB/T 260-2016 Test method for water in petroleum products—Distillation method
GB/T 261-1983 Petroleum products—Determination of flash point—Closed cup method
GB/T 261-2008 Determination of flash point—Pensky-Martens closed cup method
GB/T 261-2021 Determination of flash point—Pensky-Martens closed cup method
GB/T 265-1988 Petroleum products—Determination of kinematic viscosity and calculation of dynamic viscosity
GB/T 511-1988 Petroleum products and additives—Determination of mechanical impurities—Gravimetric method
GB/T 511-2010 Petroleum,petroleum products and additives—Method for determination of mechanical admixtures
GB/T 2433-2001 Petroleum products-Lubricating oils and additives—Determination of sulphated ash
GB/T 3535-1983 Petroleum oils—Determination of pour point
GB/T 3535-2006 Petroleum products—Determination of pour point
GB/T 4756-1998 Petroleum liquids—Manual sampling
GB/T 4756-2015 Method for manual sampling of petroleum liquids
GB/T 7631.17-2003 Lubricants,industrial oils and related products(classL)—Classification—Part 17:Family E(Internal combustion engine oils)
GB/T 7631.17-2014 Lubricants,industrial oils and related products (class L)—Classification—Part 17:Family E(Internal combustion engine oils)
SH/T 0646-1997 Lubricants test method for evaluating exhaust gas smoke of air-cooled two-stroke gasotine engine
SH/T 0667-1998 Detergency test procedure for evaluating air-cooled two-stroke gasoline engine oils
SH/T 0668-1998 Lubricity test procedure for evaluating air-cooled two-stroke gasoline engine oils
SH/T 0669-1998 Exhaust system blocking test procedure for evaluating air-cooled two-stroke gasoline engine oils
SH 0164-1992 Rules for packaging, storage, transportation, and acceptance of petroleum products
SH/T 0710-2001 Water-cooled two-stroke gasoline engine oil cleanliness evaluation method (EGD method)
GB/T 3535-2025 Determination of pour point for petroleum products
Adopt standards
ISO 13738:200
Related Standards
GB/T 3142-1982
Replaced
GB/T 3142-1982 Lubricants—Determination of load-carrying capacity (four balls method)
GB/T 3498-1983
Replaced
GB/T 3498-1983 Lubricating greases—Determination of dropping point (wide temperature range)
GB/T 4929-1985
Active
GB/T 4929-1985 Lubricating grease—Determination of dropping point
GB/T 5018-1985
Replaced
GB/T 5018-1985 Standard test method for corrosion preventive properties of lubricating greases
GB/T 6144-1985
Replaced