T/SZZL 013-2022 Active

Main Technical Content: 4.1 Structure of the Material Crushing Vehicle 1. Class II chassis 2. Feed inlet 3. Engine compartment 4. Crusher 5. Discharge outlet 6. Storage bin 7. Rear guard 8. Electronic control box 9. Power system 10. Side guard 4.2 Whole Vehicle 4.2.1 The material crushing vehicle shall comply with the provisions of this document and be manufactured according to the approved product drawings and technical documents. 4.2.2 Purchased components and outsourced parts shall comply with the relevant regulations and have the manufacturer's quality certificate. They can only be used after passing the inspection by the vehicle manufacturer. All self-made components shall be inspected and approved before assembly. 4.2.3 The outer dimensions, axle load, and mass limits of the vehicle shall comply with the provisions of GB 1589. 4.2.4 The driving safety requirements of the material crushing vehicle shall comply with the provisions of GB 7258. 4.2.5 The installation requirements of external lighting and signal devices of the material crushing vehicle shall comply with the provisions of GB 4785. 4.2.6 The paint coating shall comply with the provisions of QC/T 484. The electroplating layer and chemical treatment layer shall comply with the provisions of QC/T 625. 4.2.7 Welded parts shall comply with the provisions of JB/T 5943. 4.2.8 All control mechanisms and switches shall have clear markings. 4.2.9 For operational material crushing vehicles, interconnected signal or interlocking devices shall be installed. 4.2.10 The side and rear under-part protection of the material crushing vehicle shall comply with the provisions of GB 11567. 4.2.11 The emissions of the material crushing vehicle shall comply with the provisions of GB 3847. 4.2.12 The accelerated outdoor noise of the material crushing vehicle shall comply with the provisions of GB 1495. 4.2.13 The operating noise of the material crushing vehicle shall not e