GB/T 3533.1-1983
Replaced
T/CNFPIA 3006-2019
Active
Group standards
T/CNFPIA 3006-2019 Water-based indoor wooden door
T/CNFPIA 3006-2019 Water-based indoor wooden door
Price:
$ 20.00
Basic Information
Standard Code:
T/CNFPIA 3006-2019
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Plywood
ICS Name:
General Principles of Standardization
Publish Date:
2019-05-20
Implement Date:
2019-06-01
Scope
Scope: This standard specifies the terms and definitions, technical requirements, measurement and inspection methods, inspection rules, as well as marking, packaging, transportation, and storage for water-based varnish-coated wooden doors for indoor use. This standard applies to water-based varnish-coated wooden doors for indoor use, but not to wooden doors with special functions. Main technical content: 3 Terms and Definitions The terms and definitions defined in LY/T 1923-2010 and GB/T 5206-2015, as well as the following terms and definitions, apply to this document. For convenience, some terms and definitions from GB/T 5206-2015 are repeated below. 3.1 Water-based Coatings Water-borne coating material. A type of coating whose main volatile components are water. [GB/T 5206-2015, Definition 2.274] 3.2 Water-based Varnish-Coated Indoor Wooden Doors Indoor wooden doors coated with water-based varnishes, where the topcoat and primer are both water-based varnishes, or the topcoat uses water-based varnish and the primer uses UV-curing varnish for decoration. 3.3 Film Blisters Small raised bubbles of uneven sizes appearing between the surface of the coated object and the varnish film, or between two layers of varnish film, after the varnish film dries. 3.4 Film Scratches Traces caused by scratches on the varnish film during processing, handling, and storage of finished products. 4 Technical Requirements 4.1 Material Requirements 4.1.1 The materials used for water-based varnish-coated indoor wooden doors shall meet the requirements specified in national and industry standards, and qualified inspection reports shall be submitted in accordance with the supplier's declared standards. 4.1.2 The water-based wood coatings used for water-based varnish-coated indoor wooden doors shall comply with the requirements specified in GB 24410-2009, GB/T 23999-2009, and HG/T 5183-2017 standards. The UV primers used shall comply with the requirements specifi
Development Information
Related Standards
GB/T 12366.1-1990
Replaced
GB/T 12366.1-1990 Guideline for the work of complex standardization—Principle and method
GB/T 12366.2-1990
Replaced
GB/T 12366.2-1990 Guideline for the work of complex standardization—General requirements of complex standardization for industrial products
GB/T 12366.3-1990
Replaced
GB/T 12366.3-1990 Guideline for the work of complex standardization—General requirements of complex standardization for agriculture products
GB/T 12366.4-1991
Replaced
GB/T 12366.4-1991 Guideline for the work of complex standardization—Drafting method for program of standard-complex
GB/T 12366.5-1991
Abolished