T/CPCIF 0130-2021 Wastewater treatment technology specifications for incineration of chemical waste salts

Scope

Scope: This document stipulates the general requirements for the disposal of chemical waste salts by incineration, the characteristics of chemical waste salts, facility requirements, pollutant emission control requirements, monitoring requirements, and operational management requirements, among other aspects of environmental protection technology. This document applies to the incineration process for chemical waste salts generated during the production process in the chemical industry. Main technical content: 4.1 The design of chemical waste salt incineration facilities shall comply with this document and other mandatory provisions of national laws, regulations, standards, and norms. 4.2 The site selection and construction of the facility shall meet the requirements of relevant national and local laws, regulations, technical norms, and standards. 4.3 The chemical waste salt incineration project shall adopt secondary pollution prevention measures in accordance with the environmental impact assessment document and its approval opinions. 4.4 Enterprises shall adopt clean production technologies to achieve the reduction, resource utilization, and harmless treatment of waste salts. 4.5 Chemical waste salts shall be collected according to their salt composition and treated according to their organic content. Chemical waste salt incineration facilities shall not co-dispose of other wastes. 4.6 Storage facilities, incineration facilities, and pretreatment facilities for chemical waste salts shall be made of corrosion-resistant materials or subject to corrosion protection. The ground shall be hardened and treated to prevent leakage. 4.7 The incineration of salt-containing waste liquids shall use vertical furnaces with anti-blocking nozzles. 4.8 Chemical waste salt incineration facilities shall be equipped with waste heat recovery devices. For incineration boilers of chemical waste salts containing organic chlorine elements, the outlet temperature shall not be lower than 50

Development Information

Related Standards