T/JQZN 00001-2018 Rotor Automatic Production Line

Scope

Main Technical Content: 5. Technical requirements shall comply with the standards and be manufactured according to the approved drawings and technical documents. 5.1 Environmental Conditions 5.1.1 Environmental temperature: -25°C to 40°C 5.1.2 Relative humidity: not more than 75% (at 25°C) 5.1.3 Altitude: not exceeding 1500m 5.2 Power Supply 5.2.1 Total power supply voltage: 380V (1±10%) / 220V (1±10%) 5.2.2 Nominal frequency: 50Hz 5.3 Air Supply Requirements 5.3.1 Air pressure: 0.4MPa to 0.7MPa 5.4 Appearance Requirements 5.4.1 The production line workbench should be flat, without rust spots, indentations, or other defects. 5.4.2 The painted surface of the production line enclosure should be uniform in color, without obvious scratches, stains, or peeling. 5.4.3 Metal and plated surfaces should be smooth and shiny, without obvious scratches or rust spots. 5.4.4 The nameplate should be fixed in a visible location, with correct and secure fastening without tilting. 5.4.5 Exposed pneumatic and electrical pipelines should be arranged neatly and firmly installed, without contact with moving parts. 5.5 Assembly Quality 5.5.1 Panel indications and text should be correct, clear, and tidy. 5.5.2 Operational performance requirements: smooth mechanical transmission without jamming, flexible and reliable operation of all control buttons, and sensitive circuit control. 5.5.3 Pneumatic system: a) The pneumatic system should be reasonably designed without interference with transmission, frames, or wall panels. b) The air supply should meet the requirements for continuous production, and all pneumatic components such as cylinders, valves, oil-water separators, and air pipes should operate reliably with no air leakage. c) The production line should be equipped with swivel casters and adjustable fixed feet. 5.6 Overall Performance 5.6.1 The production line can operate normally within the power supply range specified in A

Development Information

Related Standards