T/GDWCA 0041-2018 Storage wire guide wheel technical specification

Scope

Scope: This section specifies the classification and naming, structure and requirements, and testing requirements and marking of finished guide wheels (hereinafter referred to as guide wheels). This technical specification applies to guide wheels with a minimum diameter of 5mm to 1500mm, where the diameter of the guide wheels shall include the thickness of the surface treatment layer. Main technical content: 1. Materials of guide wheels. The materials of guide wheels shall be selected from aluminum alloy, plastic, steel, ceramics, and other materials. The long-term use temperature shall be lower than the corresponding temperature limit. 2. Surface treatment methods. The surface treatment shall be selected from one or more of the following methods: spray oil, electroplating, anodic oxidation, tungsten carbide, ceramic spraying, rubber coating, and special treatment. The long-term use temperature shall be lower than the corresponding temperature limit.

Development Information

Related Standards