GB/T 5823-1986
Replaced
T/HZDS 05-2021
Active
Group standards
T/HZDS 05-2021 Steel indoor door
T/HZDS 05-2021 Steel indoor door
Price:
$ 20.00
Basic Information
Standard Code:
T/HZDS 05-2021
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Cargo deck equipment
ICS Name:
Doors and windows
Publish Date:
2021-12-01
Implement Date:
2021-12-23
Scope
Scope: This document specifies the product classification, technical requirements, test methods, inspection rules, and marking, packaging, transportation, and storage of steel interior doors. This document applies to swing doors (hereinafter referred to as steel interior doors) whose main body is made of steel panels and are primarily used for manual opening and closing in indoor rooms. This document does not apply to special-purpose interior doors such as fire prevention, escape, smoke exhaust, and radiation shielding. Main technical content: 5. Technical requirements 5.1 Door leaf and door frame 5.1.1 The steel plate materials selected for steel interior doors shall comply with the relevant provisions of GB/T 11253. The thickness of the steel plate used for the door frame (set) shall not be less than 0.7mm, and the thickness of the steel plate used for the door leaf shall not be less than 0.3mm. 5.1.2 The thickness of the door leaf shall be (40, 50, 60, 70) ± 5mm. 5.1.3 The maximum clearance between the lock hole and the lock tongue (bolt) on the door frame of steel interior doors shall not exceed 5mm. 5.1.4 The overlap width between the door leaf and the door frame shall not be less than 8mm, and the clearance between the door leaf and the door frame during movement shall not exceed 6mm. 5.1.5 The clearance between the hinge edge of the door leaf and the hinge on the door frame shall not exceed 4mm, and the clearance between the door in the closed state and the hinge on the door frame shall not exceed 5mm. 5.1.6 The surface flatness of the door leaf shall not exceed 6mm. 5.1.7 The difference in diagonal dimensions of the groove on the door frame shall not exceed 7mm. 5.1.8 After subjecting the door leaf to a soft impact load of 30kg sandbags three times, no concave deformation greater than 10mm shall occur. 5.2 Door hinges 5.2.1 During the opening of the door leaf to 90°, no tilting shall occur, and the axis of the door hinge shall n
Development Information
Related Standards
GB/T 5824-1986
Replaced
GB/T 5824-1986 Size system of opening for doors and windows in building
GB/T 5825-1986
Active
GB/T 5825-1986 Symbolic designation of direction of opening and closing and faces of doors and windows
GB/T 5826.1-1986
Replaced
GB/T 5826.1-1986 Basic size system of side hung steel door ( 32, 40mm solid section)
GB/T 5826.2-1986
Abolished
GB/T 5826.2-1986 Basic size system of side hung steel window (25mm solid section)
GB/T 5826.3-1986
Replaced