T/GDRA 012-2018 Transformer mold robot polishing and grinding technical requirements standard

Scope

Scope: This standard specifies the terms and definitions, components, performance, and working environment, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage of robot mold polishing and grinding systems. This standard applies to industrial robot systems (hereinafter referred to as "systems") used for polishing and grinding metal molds. Main technical content: 5. Technical requirements 5.1 General requirements 5.1.1 The system shall be manufactured in accordance with the design drawings and process documents approved by the specified procedures. 5.1.2 The materials and purchased components and parts used in the manufacture of the system shall be inspected by the inspection department upon their arrival at the factory and shall comply with the relevant standards. 5.2 Appearance and structure 5.2.1 The system shall have a reasonable layout, be easy to operate, have an attractive appearance, and be convenient for maintenance. 5.2.2 The colors of all components of the system shall be beautiful and harmonious. There shall be no obvious dents, cracks, or deformations on the surface of the system. The paint film and plating shall be uniform, without defects such as bubbles, scratches, peeling, flow marks, or undercoat showing through. The exposed machined surfaces shall be treated with oil for rust prevention. 5.2.3 All fasteners of the system shall not be loose, and the lubrication and cooling conditions of the movable parts shall be good. 5.2.4 The shape, buttons, displays, alarms, and interlocking devices of the system shall function normally. In various operating modes, the instructions shall be consistent with the actions. 5.2.5 The system shall operate flexibly and smoothly without any stalling phenomena. The transmission and adjustment devices shall be flexible and reliable. The operation shall be convenient, and there shall be no abnormal noises. 5.2.6 The electrical wiring and pipelines of the system shall be

Development Information

Related Standards