T/GZAAV 001-2020 Active Group standards

T/GZAAV 001-2020 Technical Specifications for the Construction of Mobile Sheep Pens

T/GZAAV 001-2020

Publish Date: 2022-02-28 Implement Date: 2022-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/GZAAV 001-2020

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: Agriculture, forestry, animal husbandry, and fisheries construction projects

ICS Name: Livestock buildings, installations, and equipment

Publish Date: 2022-02-28

Implement Date: 2022-03-01

Scope

Scope: This document specifies the technical specifications for the construction of movable sheep pens for meat sheep, including terms and definitions, construction requirements, building materials, and construction techniques. This document applies to the construction of grazing pens for meat sheep in areas where they are raised using grazing and semi-grazing/stall feeding methods. Main technical content: The sheep pen adopts a light steel structure as the load-bearing structure, with color-coated sandwich panels or magnesium oxychloride boards used as walls, and composite leakproof boards or wooden strips (bamboo strips) used as floors. 4.2 Design requirements for movable sheep pens 4.2.1 Design drawings for movable sheep pens The design of the movable sheep pen includes: length, width, height, roof, doors, and sheep beds, which can be referenced in Appendix A. 4.2.2 Length (L1) The length is determined based on terrain conditions, road conditions, and farming scale, but it is preferable to be between 5m and 10m. 4.2.3 Width (L2) For towable movable sheep pens, the width should be 3m, while for disassembleable sheep pens, the width should not exceed 5m. 4.2.4 Height (h) The internal height of the sheep pen (h1) is 1.2m, and the roof height (h2) is 0.5m to 0.8m. The angle between the roof and the horizontal tubes should be no less than 30°. The height of the sheep bed from the ground should be 20cm to 30cm. 4.2.5 Walls The walls use color-coated sandwich panels, and the metal surface should comply with the color-coated steel plates specified in GB/T 12754. The thickness of the color-coated sandwich panels should be no less than 0.3mm. 4.2.6 Roofs (A, B) The roof is supported by keel frames and covered with synthetic resin tiles. Wooden boards can also be used for the roof, but a waterproof tarpaulin must be applied. The keel frames are spaced 1.0m apart, and the seams of the sloping roof are covered with arched resin tiles, which are j