GB/T 21413.2-2021 Active National standards

GB/T 21413.2-2021 Railway applications—Electric equipment for rolling stock—Part 2:Electrotechnical components—General rules

GB/T 21413.2-2021 Railway applications—Electric equipment for rolling stock—Part 2:Electrotechnical components—General rules

Publish Date: 2021-12-31 Implement Date: 2022-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us
Price: $ 102
Download

Basic Information

Standard Code: GB/T 21413.2-2021
Standard Type: National standards
Standard Status: Active
is_force_gb: no
CCS Name: Traction electrical equipment
ICS Name: Electric traction equipment
Publish Date: 2021-12-31
Implement Date: 2022-07-01
Pages: 32 pages

Scope

This document specifies the general rules for all electrical devices installed in the main circuits, auxiliary circuits, control circuits, and indication circuits of locomotives and rolling stock.
This document applies to all electrical devices on locomotives and rolling stock.
Electrical devices primarily refer to switching equipment and control equipment, as well as relays, electro-pneumatic (magnetic) valves, resistors, fuses, etc., regardless of their control nature.
Currently, electronic components or electronic assemblies are also included in electrical devices. This document does not apply to electronic equipment, but electronic components or electronic assemblies installed in electrical devices should not be excluded from the scope of this document.
Electronic components or electronic assemblies comply with corresponding standards.
After consultation between the user and the manufacturer, some rules of this document may be applied to electrical devices on other locomotives and rolling stock (such as industrial locomotives, trolleybuses, etc.).
This document provides:
—— Device characteristics;
—— Conditions of use that the devices should comply with;
—— Test items and test methods used to verify the devices' compliance with the characteristics under the conditions of use;
—— Information that should be marked or provided on the devices.
This document does not apply to industrial electrical devices, which comply with their respective product standards. To ensure the normal operation of these devices on locomotives and rolling stock, this document only stipulates the special requirements for these devices under rail transit conditions. For this purpose, specific documents will explain the additional requirements that these devices should meet, such as:
—— Adaptation (e.g., control voltage, environmental conditions, etc.);
—— Installation and use without having to withstand the specifi

Development Information

Word Count: 63 Thousand words Pages: 32 pages

Replace the following standards

Referenced Standards

GB/T 2900.18-2008 Electrotechnical terminology—Low voltage apparatus GB/T 2900.36-2021 Electrotechnical terminology—Electric traction GB/T 5465.2-2008 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols GB/T 21413.1-2018 Railway applications—Electric equipment for rolling stock—Part 1:General service conditions and general rules GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products—Test Ca:Damp heat, steady state GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products—Test Db:Damp heat, cyclic GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle) GB/T 2423.18-2000 Environmental testing—Part 2:Tests—Test Kb:Salt mist, cyclic (sodium chloride solution) GB/T 2423.18-2012 Environmental testing—Part 2:Test methods—Test Kb:Salt mist,cyclic(sodium chloride solution) GB/T 2423.18-2021 Environmental testing—Part 2:Test methods—Test Kb:Salt mist,cyclic(sodium chloride solution) GB 4208-1993 Degrees of protection provided by enclosure (IP code) GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB/T 4208-2017 Degrees of protection provided by enclosure(IP code) GB/T 25840-2010 Guidance concerning the permissible temperature rise for parts of electrical equipment,in particular for terminals

Adopt standards

IEC 60077-2:2017

Related Standards

Contact Us