GB/T 3317-1982
Replaced
GB/T 21413.2-2021
Active
National standards
GB/T 21413.2-2021 Railway applications—Electric equipment for rolling stock—Part 2:Electrotechnical components—General rules
GB/T 21413.2-2021 Railway applications—Electric equipment for rolling stock—Part 2:Electrotechnical components—General rules
Basic Information
Standard Code:
GB/T 21413.2-2021
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Traction electrical equipment
ICS Name:
Electric traction equipment
Publish Date:
2021-12-31
Implement Date:
2022-07-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国牵引电气设备与系统标准化技术委员会(SAC/TC 278)
Pages:
32 pages
Scope
本文件规定了机车车辆主电路、辅助电路、控制电路和指示电路中安装的所有电工器件的通用规则。
本文件适用于机车车辆上的所有电工器件。
电工器件主要是指开关设备和控制设备，也包括继电器、电空（磁）阀、电阻器、熔断器等，无论其控制性质如何。
目前，通常也将电子元器件或电子组件纳入电工器件中。本文件并不适用于电子设备，但不能因为电工器件中装有电子元器件或电子组件而将其排除在本文件范围之外。
电子元器件或电子组件符合相应的标准。
经用户与制造商协商后，本文件的某些规则可适用于其他机车车辆（如工矿机车、无轨电车等）上的电工器件。
本文件给出了：
——器件特性；
——器件应当遵循的使用条件；
——用于验证器件在使用条件下符合特性的试验项目及试验方法；
——器件上应标识或给出的信息。
本文件不适用于工业用电工器件，它们符合各自的产品标准。为保证这些器件在机车车辆上正常工作，本文件仅规定了这些器件在轨道交通条件下的特殊要求。为此，将由特定的文件来说明这些器件应满足的附加要求，如：
——进行适配（例如控制电压、环境条件等）；
——不需要承受特定机车车辆使用条件的安装和使用；
——进行附加试验以验证这些器件能够满足机车车辆使用条件。
如果本文件与机车车辆相关产品标准之间的要求存在差异，则以产品标准要求为准。
Development Information
Drafting Units:
中车株洲电力机车研究所有限公司、株洲中车时代电气股份有限公司、中车青岛四方机车车辆股份有限公司、施耐德电气(中国)有限公司上海分公司
Drafting Persons:
周桂法、张利芝、杨文昭、侯小强、王远钟
Replace the following standards
Referenced Standards
GB/T 2900.18-2008 Electrotechnical terminology—Low voltage apparatus
GB/T 2900.36-2021 Electrotechnical terminology—Electric traction
GB/T 5465.2-2008 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols
GB/T 21413.1-2018 Railway applications—Electric equipment for rolling stock—Part 1:General service conditions and general rules
GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products—Test Ca:Damp heat, steady state
GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state
GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state
GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products—Test Db:Damp heat, cyclic
GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle)
GB/T 2423.18-2000 Environmental testing—Part 2:Tests—Test Kb:Salt mist, cyclic (sodium chloride solution)
GB/T 2423.18-2012 Environmental testing—Part 2:Test methods—Test Kb:Salt mist,cyclic(sodium chloride solution)
GB/T 2423.18-2021 Environmental testing—Part 2:Test methods—Test Kb:Salt mist,cyclic(sodium chloride solution)
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 25840-2010 Guidance concerning the permissible temperature rise for parts of electrical equipment,in particular for terminals
Adopt standards
IEC 60077-2:2017
Related Standards
GB/T 3318-1982
Replaced
GB/T 3318-1982 Rules for the inspecting and testing of electric locomotives after completion of construction
GB/T 6927-1986
Abolished
GB/T 6927-1986 Characteristics and tests of electrodynamic and electromagnetic braking systems
GB 1402-1998
Replaced
GB 1402-1998 A.C.Voltage of electric traction for the railway main lines
GB/T 3319-1998
Replaced
GB/T 3319-1998 Definition of the rated output of electric locomotives and motive power units
GB 5914.1-2000
Replaced