GB/T 15584-1995
Replaced
T/XJSL 0007-2019
Active
Group standards
T/XJSL 0007-2019 Injection-molded sealing packaging drum
T/XJSL 0007-2019 Injection-molded sealing packaging drum
Price:
$ 20.00
Basic Information
Standard Code:
T/XJSL 0007-2019
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Synthetic materials
ICS Name:
Comprehensive products made from rubber and plastic
Publish Date:
2019-09-27
Implement Date:
2019-10-29
Scope
Scope: This standard specifies the terms and definitions, schematic diagrams, classification, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage of injection-molded sealed packaging barrels (hereinafter referred to as injection-molded barrels). This standard applies to injection-molded sealed packaging barrels made of polyethylene and polypropylene resins, with a suitable amount of color masterbatches, antistatic agents, and other additives added, and molded by injection molding; Main technical content: appearance, capacity deviation, mass deviation, dimensional deviation, wall thickness ratio and minimum wall thickness of symmetrical parts, sealing test, room-temperature drop test, low-temperature linear drop test, hanging test, stacking test, ash content, surface resistivity, and hygiene performance.
Development Information
Related Standards
GB/T 16996-1997
Replaced
GB/T 16996-1997 Rubber,vulcanized—Assessment of changes in properties after exposure to natural weathering or artificial light
GB 13552-1998
Replaced
GB 13552-1998 Automotive V-ribbed belts
GB/T 17516.1-1998
Active
GB/T 17516.1-1998 V-and ribbed belt drives—Dynamic test to determine pitch zone location—Part 1:V-belts
GB/T 17516.2-1998
Active
GB/T 17516.2-1998 V-and ribbed belts drives—Dynamic test to determine pitch zone location—Part 2:V-ribbed belts
GB/T 3686-1998
Replaced