T/NANTEA 0013-2020 Pesticide spraying safety operation specifications for unmanned aerial vehicles (UAVs) in plant protection
T/NANTEA 0013-2020 Pesticide spraying safety operation specifications for unmanned aerial vehicles (UAVs) in plant protection
Basic Information
Scope
Scope: This standard specifies the preparation before safe operation, on-site operation, and post-operation maintenance of agricultural drones. It applies to four-rotor agricultural drones, and eight-rotor agricultural drones may refer to it for implementation. Main technical content: 3. Preparation before operation 3.1 Requirements for agricultural drones: The agricultural drones must comply with the relevant provisions of AC-91-FS-2015-31 and NY/T 3213. 3.2 Requirements for flight range: The flight range must be strictly implemented according to the operation plan, and the flight distance should be controlled within the line of sight. At the same time, the facilities and air control requirements around the operation area should be understood. 3.3 Requirements for operation blocks 3.3.1 The operation blocks and their surrounding areas should avoid having trees, high-voltage towers, power lines, and other obstacles that affect safe flight. 3.3.2 The operation blocks and their surrounding areas should have suitable landing sites and flight routes for agricultural drones. 3.3.3 Non-restricted flight areas according to national regulations. 3.4 Requirements for operators 3.4.1 Operators must obtain training certificates from relevant institutions. 3.4.2 Operators should be in good health and not operate under the influence of alcohol or in an unfit condition. Those with allergies to pesticides are not allowed to operate. 3.4.3 Operators are strictly prohibited from wearing slippers and must wear masks, helmets, anti-glare glasses, protective clothing, and operate in the upwind direction and facing away from the sun. They must maintain a safe distance of more than 5m from the agricultural drones. 3.5 Requirements for pesticides 3.5.1 The pesticides sprayed should be qualified products registered by the pesticide management department and comply with the provisions of NY/T 1276 and GB/T 8321.1-8231.9. 3.5.2 Efficient, low-toxicity, and low-residue pesticide varieties su