T/CPMIA Z01-2019 Active Group standards

T/CPMIA Z01-2019 Fully electric plastic injection molding machine

Publish Date: 2019-04-12 Implement Date: 2019-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/CPMIA Z01-2019

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: Machinery for rubber and plastic processing

ICS Name: Rubber and plastic industrial equipment

Publish Date: 2019-04-12

Implement Date: 2019-05-01

Scope

Scope: This standard specifies the terms and definitions, models and basic parameters, requirements, testing methods, inspection rules, and marking, packaging, transportation, and storage of fully electric plastic injection molding machines. This standard applies to screw-type, single-station, horizontal fully electric plastic injection molding machines (hereinafter referred to as "fully electric injection molding machines") with a clamping force not exceeding 5,000 kN. Main technical contents: 1. The allowable parallelism between the mold installation surfaces of the moving mold and the fixed mold shall comply with the provisions of Table 1. 2. The coaxiality of the axis of the nozzle hole with the axis of the positioning hole of the fixed mold shall comply with the provisions of Table 2. 3. The repeat accuracy of the clamping force shall not exceed 1%. 4. The uneven load rate of the tie rod shall not exceed 3%. 5. The repeat positioning accuracy of the opening mold shall not exceed 0.05 mm. 6. The injection positioning accuracy shall not exceed 0.05 mm. 7. The ejector positioning accuracy shall not exceed 0.10 mm. 8. The steady-state fluctuation value of the barrel temperature shall not exceed 2 ℃. Requirements for energy consumption grade, noise, parallelism, etc. can be found in the standard text.