T/CISA 341-2024 Green Design Product Evaluation Specification for Energy-saving Hot-rolled Steel Plate and Strip

Scope

Scope: This document specifies the terms and definitions, evaluation requirements, and preparation basis for green design products of energy-use steel plates and steel strips. This document applies to the evaluation of green design products of energy-use steel plates and steel strips. Main technical content: Basic requirements. Manufacturers shall establish, implement, maintain, and continuously improve quality management, occupational health and safety management, and environmental management systems in accordance with GB/T 19001, GB/T 28001, and GB/T 24001. Manufacturers shall adopt advanced technologies and processes encouraged by the state, and shall not use technologies, processes, equipment, or related substances that have been phased out or prohibited by the state or relevant departments. Manufacturers shall have dedicated storage facilities for solid waste to prevent scattering, loss, and leakage; and shall equip dust recovery devices during the production process. Manufacturers shall reduce the generation of solid waste, make full and rational use of it, and dispose of it in an environmentally friendly manner. Manufacturers shall comply with relevant national and local environmental laws and regulations, and ensure that pollutant emissions meet the requirements of national and local total emission control and pollution permit management. Manufacturers shall install energy metering devices in accordance with GB 17167, and equip pollution monitoring and online monitoring equipment in accordance with environmental laws, regulations, and standards. Manufacturers shall comply with safety production norms and have no major environmental pollution incidents within three years (or since the start of production, if less than three years). Participating green design product evaluation products shall meet the basic performance requirements of the corresponding product standards and satisfy the design and use requirements. Basic performance includes but is not limited

Development Information

Related Standards