T/JAMIA 007-2025 Active Group standards

Technical Specifications for High-Efficiency Flexible Production Lines of Photovoltaic Modules, T/JAMIA 007-2025

T/JAMIA 007-2025 Photovoltaic module high-efficiency flexible production line technical specifications

Publish Date: 2025-04-25 Implement Date: 2025-04-25 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/JAMIA 007-2025

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: -

ICS Name: The production process of glass and ceramics

Publish Date: 2025-04-25

Implement Date: 2025-04-25

Scope

Main Technical Content: 6.1 Appearance 6.1.1 The production line shall comply with the requirements of this document and be manufactured in accordance with the approved processes and technical documents. 6.1.2 The painted surface (powder coating) shall have consistent color and uniform paint layer, and the surface shall be smooth and glossy, with no piling, peeling, bubbling, scratches, dents, pinholes, or exposed substrate defects. 6.1.3 The electroplated and blackened components shall have consistent luster and smooth surfaces, and the machined parts shall meet the requirements of the relevant drawings. 6.1.4 Nylon, plastic, and rubber components shall not exhibit deformation or aging cracking. 6.1.5 Sheet metal parts shall be flat and regular, without protrusions, distortions, or warping. The bends shall have clear edges without creases or wrinkles, and the clearance between joints shall be consistent. 6.1.6 The pipeline arrangement shall be regular, neat, and aesthetically pleasing. 6.1.7 There shall be no debris, iron filings, or dust inside the electrical cabinets. The entire equipment shall be clean. 6.1.8 The installation of the outer frame shall be flat and straight, without scratches; there shall be no visible gaps between the components and the aluminum frame, and no gaps at the junction of the backboard and the aluminum frame. 6.1.9 All labels and signs shall be clear, eye-catching, upright, and firmly fixed. 6.2 Dimensional Tolerances 6.2.1 The height deviation before and after the line’s direction-changing workstation shall be ±30 mm. For other transmission units, the height deviation along the transmission direction shall be ±2 mm, and the spacing between connected units shall not exceed 50 mm. 6.2.2 The conveyance on the photovoltaic module production line shall be accurate and stable, with a repeat positioning deviation of ±25 mm per cycle. 6.2.3 After the photovoltaic modules are framed on the production line, the error