MT/T 689.1-1997
Replaced
GB/T 13344-2019
Active
National standards
GB/T 13344-2019 Down-the-hole hammers and bits
GB/T 13344-2019 Down-the-hole hammers and bits
Price:
$ 54
Basic Information
Standard Code:
GB/T 13344-2019
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Mining equipment
ICS Name:
\nTunneling and laying pipeline equipment
Publish Date:
2019-08-30
Implement Date:
2020-03-01
Pages:
11 pages
Scope
This standard specifies the terms and definitions, models and basic parameters, technical requirements, test methods, inspection rules, and marking, packaging, transportation, and storage for down-the-hole impactors and down-the-hole drills. This standard applies to down-the-hole impactors and down-the-hole drills powered by compressed air or a mixture of compressed air and water.
Development Information
Replace the following standards
Referenced Standards
GB/T 1184-1996 Geometrical tolerancing—Geometrical tolerance for features without individual tolerance indications
GB/T 22512.2-2008 Petroleum and natural gas industries—Rotary drilling equiment—Part 2:Threading and gauging of rotary shouldered thread connections
GB/T 5621-1999 Test methods of performance for rock drilling machines and pneumatic tools
GB/T 5621-2008 Test methods of performance for rock drilling machines and pneumatic tools
GB/T 6247-1986 Terminology of rock drilling machines and pneumatic tools
GB/T 6247-2004 Rock drilling machines and pneumatic tools-Terminology
GB/T 6247.1-2013 Rock drilling machines and portable power tools—Terminology—Part 1:Rock drilling machines,pneumatic tools and machines
GB/T 6247.2-2013 Rock drilling machines and portable power tools—Terminology—Part 2:Hydraulic tools
GB/T 6247.3-2013 Rock drilling machines and portable power tools—Terminology—Part 3:accessories,parts and mechanism
GB/T 6247.4-2013 Rock drilling machines and portable power tools—Terminology—Part 4:Performance test
GB/T 13306-1991 Plates
GB/T 13306-2011 Plates
JB/T 7161-2011 Drilling machinery and pneumatic tools - General technical specification for heat treatment parts
JB/T 7165-2014 The general technical requirements for assembly of rock drilling machinery and pneumatic tools
JB/T 7302-2016 The General Technical Conditions for Product Packaging of Rock-boring Machinery and Pneumatic Tools
JB/T 7161-1993 Drilling machinery and pneumatic tools, general technical specification for heat treatment parts
JB/T 7165-2004 The general technical requirements for assembling rock drilling machinery and pneumatic tools
JB/T 7302-2006 Drilling machinery and pneumatic tools: General technical specifications for product packaging
JB/T 9857-1999 Drilling machinery and pneumatic tools General technical specification for painting
JB/T 7302-1994 Rock drilling machinery and pneumatic tools - General technical specification for product packaging
JB/T 9857-2010 General specifications for painting of rock drilling machines and pneumatic tools
Related Standards
MT/T 689.2-1997
Replaced
MT/T 689.2-1997 Plough—Specification of type inspection
GB/T 5621-1999
Replaced
GB/T 5621-1999 Test methods of performance for rock drilling machines and pneumatic tools
GB/T 13343-2008
Active
GB/T 13343-2008 Blast hole tricone rock bits
GB/T 5621-2008
Active
GB/T 5621-2008 Test methods of performance for rock drilling machines and pneumatic tools
GB 25518-2010
Active