GB/T 5463.1-1985
Replaced
GB/T 14506.31-2019
Active
National standards
GB/T 14506.31-2019 Methods for chemical analysis of silicate rocks—Part 31:Determination of 12 components including silicon dioxide etc.—Lithium metaborate fusion-inductively coupled plasma atomic emission spectrometry
GB/T 14506.31-2019 Methods for chemical analysis of silicate rocks—Part 31:Determination of 12 components including silicon dioxide etc.—Lithium metaborate fusion-inductively coupled plasma atomic emission spectrometry
Price:
$ 50.00
Basic Information
Standard Code:
GB/T 14506.31-2019
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Non-metallic minerals
ICS Name:
Non-metallic minerals
Publish Date:
2019-10-18
Implement Date:
2020-05-01
Pages:
20 pages
Scope
This part of GB/T 14506 specifies the determination of silica, alumina, total iron (calculated as Fe2O3), calcium oxide, magnesium oxide, potassium oxide, sodium oxide, titanium dioxide, manganese oxide, phosphorus pentoxide, strontium, and barium in silicate rocks by lithium metaborate fusion-inductively coupled plasma atomic emission spectrometry.
This part is applicable to the determination of silica, alumina, total iron (calculated as Fe2O3), calcium oxide, magnesium oxide, potassium oxide, sodium oxide, titanium dioxide, manganese oxide, phosphorus pentoxide, strontium, and barium in silicate rocks by lithium metaborate fusion-inductively coupled plasma atomic emission spectrometry. It is also applicable to the determination of the above-mentioned components in soil and sediment samples.
Development Information
Same series standard
GB/T 14506.32-2019 Methods for chemical analysis of silicate rocks—Part 32:Determination of 20 components including aluminium oxide etc.—Mixed acid digestion-inductively coupled plasma atomic emission spectrometry
GB/T 14506.33-2019 Methods for chemical analysis of silicate rocks—Part 33:Determination of arsenic,stibium,bismuth and mercury elements content—Hydride generation atomic fluorescence spectrometry
GB/T 14506.34-2019 Methods for chemical analysis of silicate rocks—Part 34:Determination of loss on ignition—Gravimetric method
Referenced Standards
GB/T 6379.2-2004 Accuracy(trueness and precision)of measurement methods and results—Part 2:Basic method for the determination of repeatability and reproducibility of a standard measurement method
GB/T 6379.4-2006 Accuracy (trueness and precision) of measurement methods and results—Part 4:Basic methods for the determination of the trueness of a standard measurement method
GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB/T 14505-1993 Method for chemical analysis of rocks and ores—General rules and regulations
GB/T 14505-2010 Method for chemical analysis of rocks and ores—General rules and regulations
GB/T 14506.1-1993 Silicate rocks—Determination of hygroscopic water content—Gravimetric method
GB/T 14506.1-2010 Methods for chemical analysis of silicate rocks—Part 1:Determination of hygroscopic water content
JJG 768-2005 Emission Spectrometer
GB/T 6379.4-2025 Accuracy(trueness and precision)of measurement methods and results—Part 4:Basic methods for the determination of the trueness of a standard measurement method
Related Standards
GB/T 5463.2-1985
Replaced
GB/T 5463.2-1985 Technical terms of non-metallic mineral products—Talc
GB/T 5463.3-1986
Replaced
GB/T 5463.3-1986 Technical terms of non-metallic mineral products—Gypsum and anhydrite
GB/T 14505-1993
Replaced
GB/T 14505-1993 Method for chemical analysis of rocks and ores—General rules and regulations
GB/T 14506.10-1993
Replaced
GB/T 14506.10-1993 Silicate rocks—Determination of manganese oxide
GB/T 14506.11-1993
Replaced