T/SZMES 6-2024 Active Group standards

T/SZMES 6-2024 Blasting and forging integrated forming machine

Publish Date: 2023-05-19 Implement Date: 2023-05-26 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/SZMES 6-2024

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: -

ICS Name: Molding equipment and casting equipment

Publish Date: 2023-05-19

Implement Date: 2023-05-26

Scope

Scope: This document specifies the terms and definitions, types and basic parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage of integrated casting and forging forming machines (hereinafter referred to as "forming machines"). This document is applicable to the design, manufacture, and use of integrated casting and forging forming machines. Main technical contents: The integrated casting and forging forming machines shall comply with the requirements of this document and be manufactured in accordance with the drawings and technical documents approved by the prescribed procedures. The hydraulic system and hydraulic components shall comply with the provisions of GB/T 3766 and GB/T 7935. The electrical system shall comply with the provisions of GB/T 5226.1. The pneumatic system shall comply with the provisions of GB/T 7932. There shall be nameplates and labels on the integrated casting and forging forming machines indicating the requirements for the operation of the hydraulic and pneumatic systems, lubrication, and safety. The content and markings of the nameplates and labels shall be correct, and the labels shall comply with the provisions of GB/T 13306. It is allowed to inlay or cast clear factory names and trademarks. The integrated casting and forging forming machines shall have reliable lubrication devices and shall have detection functions and audible and visual alarm prompts. The integrated casting and forging forming machines shall have sensor interfaces for testing process parameters. The hydraulic system of the integrated casting and forging forming machines shall be unobstructed and leak-free. The temperature of the working fluid shall not exceed 55°C during continuous operation. When the temperature exceeds the above value, an automatic alarm shall be triggered. The working fluid medium shall comply with the provisions of the technical documents, and the solid particle p