T/CVDA 2-2019 Active Group standards

T/CVDA 2-2019 Animal large-volume injection polyester bottle

Publish Date: 2019-12-18 Implement Date: 2020-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/CVDA 2-2019

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: Veterinary drugs and livestock farming, veterinary equipment

ICS Name: Laboratory medicine

Publish Date: 2019-12-18

Implement Date: 2020-05-01

Scope

Scope: This standard specifies the terms, product classification, technical requirements, performance indicators, test methods, inspection rules, marking, packaging, transportation, and storage for polyester bottles for large-capacity veterinary injections. This standard applies to the packaging directly contacting large-capacity veterinary injections. This standard applies to non-finally sterilized polyester bottles manufactured using injection-blow molding technology with polyester (PET) as the main raw material. Main technical content: 5.1 Raw materials: Polyethylene terephthalate (PET). 5.2 Appearance quality: The appearance quality requirements shall comply with Table 1. Table 1: Appearance quality requirements Item Requirements Bottle mouth The end face of the bottle mouth shall be flat, without chipping or missing parts, and there shall be no blockage defects inside the bottle mouth. Bottle body The bottle body shall be fully molded, with uniform color, no obvious color difference, no sand holes, no oil stains, no bubbles, no deformation, no obvious shrinkage, and no obvious scratches. Bottle bottom The bottle can stand stably. 5.3 Performance indicators: The performance indicators shall comply with Table 2. Table 2: Performance indicators Item Requirements Identification It shall be consistent with the reference spectrum. Sealing There shall be no water ingress or bubbling inside the bottle. Drop resistance It shall not break. Water vapor permeability * Not exceed 0.2%. Acetaldehyde * Weight loss shall not exceed 0.2%. Residue of ignition * Not exceed 0.1%. Leachables test * Clarity: The solution shall be clear; if it is turbid, it shall not be thicker than the reference solution No. 2. pH change ≤ 1.0. Heavy metals Not exceed 0.001%. Oxidizable substances ≤ 1.5ml. Non-volatile matter Water ≤ 12.0mg, 65% ethanol ≤ 50.0mg, hexane ≤ 75.0mg. Absorbance ≤ 0.10. Decolorization test The