T/CI 095-2022 Eco-friendly wood composite door

Scope

Scope: This document specifies the terms and definitions, technical requirements, test methods, inspection rules, marking, usage instructions, packaging, transportation, and storage of environmentally friendly wooden composite doors. This document applies to environmentally friendly wooden composite doors made from man-made boards and wood as the base material, with a PVC coating or impregnated film paper on the surface, which do not require painting treatment. Main technical content: 4.1 Specifications and allowable deviations 4.1.1 The structural dimensions of the door leaf and door frame can be determined according to the dimensions of the door opening, the structure of the door frame, and the installation gap, and shall comply with the provisions of GB/T 5824. 4.1.2 Thickness of the door leaf The conventional thickness of the door leaf is preferably 35 mm, 38 mm, 40 mm, 45 mm, 50 mm, 55 mm, or 60 mm. Other thicknesses can also be produced upon negotiation between the supplier and the buyer. 4.1.3 Thickness of the door frame The thickness of the door frame shall be determined according to the design requirements. The thickness at the connection point between the door frame and ordinary hinges shall not be less than 25 mm, and the thickness at the connection point with T-shaped hinges shall not be less than 18 mm. Preferred thicknesses include 28 mm, 30 mm, 38 mm, 40 mm, 45 mm, and 50 mm.

Development Information

Related Standards