GB/T 7155.1-1987
Abolished
T/JCJJ 046-2024
Active
Group standards
T/JCJJ 046-2024 High-performance polyethylene (PE) pipes for irrigation
T/JCJJ 046-2024 High-performance irrigation polyethylene (PE) pipe material
Price:
$ 20.00
Basic Information
Standard Code:
T/JCJJ 046-2024
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Water supply and drainage equipment and devices
ICS Name:
Plastic pipe
Publish Date:
2024-07-16
Implement Date:
2024-10-01
Scope
Main technical content: This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation, and storage for polyethylene (PE) water supply pipes (hereinafter referred to as pipes) made of high-density polyethylene resin as the main raw material and with the addition of appropriate additives through extrusion molding. This document is applicable to pipes with a nominal pressure of 0.4MPa to 1.6MPa, a nominal outer diameter of 16mm to 630mm, a water temperature of no more than 40℃, and a maximum operating pressure (MOP) of 1.6MPa, which are used for agricultural water supply, irrigation, and landscape gardening, among other applications.
Development Information
Related Standards
GB/T 7155.2-1987
Abolished
GB/T 7155.2-1987 Determination of density of thermoplastic pipes and fittings—Part 2:Determination of density of polypropylene pipes and fittings
GB/T 13018-1991
Abolished
GB/T 13018-1991 Polyethylene (PE) pipes—Tolerances on outside diameters and wall thicknesses
GB/T 13019-1991
Abolished
GB/T 13019-1991 Polypropylene (PP) pipes—Tolerances on outside diameters and wall thicknesses
GB/T 13020-1991
Abolished
GB/T 13020-1991 Unplasticized polyvinyl chloride (PVC-U) pipes—Tolerances on outside diameters and wall thicknesses
GB/T 13526-1992
Replaced