T/HIS 001-2021 Low-pressure Distribution Meters Simulation Device

Scope

Main technical content: 1. Line fault setting and metering secondary loop fault setting 2. RS485 communication fault setting and power meter RS485 communication fault, collector RS485 communication fault, and concentrator RS485 communication fault 3. Meter fault setting: sampling unit fault, display unit fault, communication unit fault, clock unit fault, and metering unit fault 4. Concentrator terminal fault setting: concentrator terminal hardware unit fault, concentrator terminal uplink communication unit fault, concentrator terminal downlink communication unit fault, and concentrator terminal measurement point parameter unit fault 5. Cross-zone fault setting: cross-zone logistics fault setting and cross-zone parameter fault setting 6. Load cutting fault setting: physical fault setting for load cutting 7. Voice timing and display: voice countdown and time display 8. Data acquisition: power meter measurement point data acquisition 9. Data transmission and concentrator communication, relay (route), and data forwarding (communication conversion) 10. Local function operation status indication and local maintenance interface 11. Safety protection: overvoltage, overload, short-circuit, and leakage protection 12. Master station system: metering automation system and master station simulation system 13. Multi-level linkage debugging and multi-level linkage testing

Development Information

Related Standards