GB/T 10394.2-2025 Active National standards

GB/T 10394.2-2025 Equipment for harvesting—Forage harvesters—Part 2:Specification of characteristics and performance

GB/T 10394.2-2025 Equipment for harvesting—Forage harvesters—Part 2:Specification of characteristics and performance

Publish Date: 2025-10-31 Implement Date: 2026-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 50

Out of stock

Basic Information

Standard Code: GB/T 10394.2-2025

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Agricultural machinery and equipment

ICS Name: Harvesting equipment

Publish Date: 2025-10-31

Implement Date: 2026-05-01

Pages: 12 pages

Scope

This document specifies the performance, dimensions (defined in GB/T 10394.1-2025) and methods and requirements for the functional components of approved feed harvesters. It is also permissible to compare the performance of feed harvesters through comparative tests.
This document is applicable to the design, manufacture, and inspection and testing of feed harvesters.

Development Information

Word Count: 13 Thousand words Pages: 12 pages

Same series standard

GB/T 10394.1-2025 Equipment for harvesting—Forage harvesters—Part 1:Vocabulary GB/T 10394.3-2025 Equipment for harvesting—Forage harvesters—Part 3:Test methods

Replace the following standards

GB/T 10394.2-2002 Forage harvesters—Part 2:Specification of characteristics and performance

Referenced Standards

GB/T 1592.1-2008 Agricultural tractors—Rear-mounted power take-off types 1,2 and 3—Part 1:General specifications,safety requirements,dimensions for master shield and clearance zone GB/T 1592.1-2016 Agricultural tractors—Rear-mounted power take-off types 1,2,3 and 4—Part 1:General specifications,safety requirements，dimensions for master shield and clearance zone GB/T 1593-2015 Agricultural wheeled tractor—Rear-mounted three-point linkage—Categories 0、1N、1、2N、2、3N、3、4N and 4 GB/T 1593.1-1996 Agricultural wheeled tractors—Rear-mounted three-point linkage—Part 1:Categories 1,2,3 and 4 GB/T 1593.2-2003 Agricultural wheeled tractors—Rear mounted three-point linkage—Part 2:category 1N(Narrow hitch) GB 1593.4-1987 Agricultural wheeled tractors—Three-point linkage—Part 4:Category 0 GB/T 1593.4-2004 Agricultural wheeled tractors—Rear mounted Three-point linkage—Part4:category 0 GB/T 3871.5-1993 Test methods for agricultural wheeled and tracklaying tractors—Part 5:Turning and clutch operating tests GB/T 3871.5-2006 Agricultural tractors—Test procedures—Part 5:Turning and clearance diameters GB/T 3871.5-2022 Agricultural tractors—Test procedures—Part 5:Turning and clearance diameters GB/T 8095-2005 Equipment for harvesting—Dimensional compatibility of forage harvesting machinery GB/T 10394.3-2025 Equipment for harvesting—Forage harvesters—Part 3:Test methods GB/T 10394.1-2025 Equipment for harvesting—Forage harvesters—Part 1:Vocabulary

Adopt standards

ISO 8909-2:2021

Related Standards

GB/T 5982-1986 Replaced

GB/T 5982-1986 Testing method for rice and wheat thresher

Publish Date: 1986-04-04

GB/T 6979-1986 Replaced

GB/T 6979-1986 Terminology for grain harvesting machinery

Publish Date: 1986-11-08

GB/T 14178-1993 Replaced

GB/T 14178-1993 Measurement at the operator's position of airborne noise emitted by brush saws

Publish Date: 1993-02-16

GB/T 14179-1993 Replaced

GB/T 14179-1993 Brush saws—Measurements of hand-transmitted vibration

Publish Date: 1993-02-16

GB/T 14224-1993 Abolished

GB/T 14224-1993 Classification and terminology for machine of hay and forage harvesting

Publish Date: 1993-03-03

GB/T 14247-1993 Replaced

GB/T 14247-1993 Testing methods for rake

Publish Date: 1993-03-22