T/GDRA 012-2019 Transformer mold robot polishing and grinding technical requirements standard

Scope

Scope: This standard specifies the terms and definitions, components, performance, working environment, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage of robot mold polishing systems. This standard applies to industrial robot systems used for polishing and grinding metal molds (hereinafter referred to as "systems"). Main technical content: 5. Technical requirements 5.1 General requirements 5.1.1 The system shall be manufactured in accordance with the approved design drawings and process documents specified in the procedures. 5.1.2 The materials and purchased components and parts used in the system manufacture shall be inspected by the inspection department upon arrival at the factory and shall comply with the relevant standards. 5.2 Appearance and structure 5.2.1 The system shall have a reasonable layout, be easy to operate, have an attractive appearance, and be convenient for maintenance. 5.2.2 The colors of all components of the system shall be beautiful and harmonious. The surface of the system shall not have obvious dents, cracks, or deformations. The paint film and plating shall be uniform, without bubbles, scratches, peeling, flow marks, or undercoat defects. The exposed machined surfaces shall be treated with oil to prevent rust. 5.2.3 All fasteners of the system shall not be loose, and the lubrication and cooling conditions of the movable parts shall be good. 5.2.4 The shape, buttons, displays, alarms, and interlocking devices of the system shall function normally. In various operating modes, the instructions shall correspond to the actions. 5.2.5 The system shall operate flexibly and smoothly without any blocking phenomenon. The transmission and adjustment devices shall be flexible and reliable. The operation shall be convenient without abnormal noises. 5.2.6 The electrical wiring and pipelines of the system shall be arranged reasonably, neatly, and firmly installed, and shall not contact with the r

Development Information

Related Standards