T/QZZN 04-2023 Active Group standards

T/QZZN 04-2023 Intelligent PCB laminator

Publish Date: 2023-11-15 Implement Date: 2023-11-20 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/QZZN 04-2023

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: -

ICS Name: Terminology (principles and coordination and cooperation)

Publish Date: 2023-11-15

Implement Date: 2023-11-20

Scope

Scope: This document specifies the terms and definitions, technical requirements, test methods, inspection rules, marking, labeling, packaging, transportation, and storage for intelligent PCB laminating machines. Intelligent PCB laminating machines, which use methods of comparing PCB template images with test images and then making intelligent defect judgments, can provide high-speed and accurate quality criteria and processing for the production process. Hereinafter referred to as: intelligent PCB machines; Main technical content: 1. Intelligent PCB machines shall comply with the requirements of this standard and be manufactured according to the drawings and technical documents approved by the prescribed procedures. 2. Intelligent PCB machines shall be able to operate accurately and orderly in accordance with the design control requirements and operating positions. 3. The quality of all purchased components and electrical components in intelligent PCB machines, such as motors, ball screw pairs, linear guide pairs, and plastic conveying mechanisms, shall comply with the standards specified and meet the functional indicators required for laminating production lines. 4. The structure of the whole machine and the PCB board shall be a bare board without any components or wires installed or soldered on it. It shall comply with the provisions of GB/T 16261-2017. 5. The intelligent detection devices shall use high-definition industrial CCD cameras, auxiliary light source devices, digital terminals, industrial control machines, and automatic execution devices. The PCB template images and PCB test images shall correspond to each other and be binary images. Supported by PCB intelligent detection software. 6. The assembly of laminates shall meet the following requirements: - The parallelism deviation between the working surfaces of each layer of laminates shall be ≤0.010mm; - The outer dimensions of the laminates shall be more than 50mm larger than