T/GDWCA 0035-2018 Abolished Group standards

T/GDWCA 0035-2018 HDMI connector cable

Publish Date: 2018-08-01 Implement Date: 2018-09-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 20.00

Out of stock

Basic Information

Standard Code: T/GDWCA 0035-2018

Standard Type: Group standards

Standard Status: Abolished

is_force_gb: no

CCS Name: Textile machinery and equipment

ICS Name: Cable

Publish Date: 2018-08-01

Implement Date: 2018-09-01

Scope

Scope: This standard specifies the product classification, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of HDMI cables. This standard applies to all HDMI interface high-definition cable connectors. Main technical content: 1. Insertion force: The force required to fully insert an HDMI interface should not exceed 44.1N. The force required to fully insert a DVI interface and a VGA interface should not exceed 58.8N. 2. Pull-out force: The force required to fully pull out an HDMI interface should not be less than 9.8N. The force required to fully pull out a DVI interface should not be less than 9.8N, and the force required to fully pull out a VGA interface should not be less than 16.2N. 3. High-temperature load: The product should be able to operate continuously for 2 hours at a temperature of 50℃. 4. Salt spray: Under a temperature of (35±2)℃ in a salt spray corrosion box, using a 5±0.1% concentration of sodium chloride (NaCl) solution for continuous spraying (iron shell for 24 hours, PIN needle for 48 hours). After the test, the sample should be rinsed with clean water and placed at room temperature for 2 hours, and there should be no obvious rust or oxidation on the sample.