T/GDWCA 0015-2018 Winding Process Operating Standards

Scope

Scope: This standard specifies the preparation work, precautions, operating procedures, and records for the winding process. This standard applies to the process of winding metal conductors onto the surface of semi-finished products during cable production. Main technical content: Precautions: 1. The number of customer requirements must not be less, and the specifications of copper wires should be consistent. 2. The tension of each copper wire should be consistent, and the tension of the insulated wires should be moderate. 3. During the winding of copper wires, there should be no wire jumping phenomenon to avoid wire breakage in subsequent workstations. If more than 4 copper wires are found to be broken, a report and disposal process should be carried out. 4. The insulated wires should be flat and smooth, and the shielding rate should meet the customer's requirements. 5. During operation, if copper wires or core wires break, the breakage indicator light will turn on, and the machine will automatically stop running. The wires should be repaired and the RUN button should be pressed to resume operation. 6. If the winding axis does not wind tightly during operation, the spring at the back of the machine should be adjusted appropriately.

Development Information

Related Standards