T/CISA 343-2024 Green Design Product Evaluation Technical Specification for High-Strength Steel Plates and Belts Used in Construction Machinery

Scope

Scope: This document specifies the terms and definitions, evaluation requirements, and preparation basis for green design products of high-strength steel plates and steel strips used in construction machinery. This document applies to the evaluation of green design products of high-strength steel plates and steel strips used in construction machinery; Main technical content: Basic requirements. Manufacturers shall establish, implement, maintain, and continuously improve quality management, occupational health and safety management, and environmental management systems in accordance with GB/T 19001, GB/T 28001, and GB/T 24001. Manufacturers shall adopt advanced technologies and processes encouraged by the state, and shall not use technologies, processes, equipment, or related substances that have been phased out or prohibited by the state or relevant departments. Manufacturers shall have dedicated storage facilities for solid waste to prevent dust dispersion, loss, and leakage; and shall equip their production processes with dust collection devices. Manufacturers shall reduce the generation of solid waste, make full and rational use of solid waste, and dispose of it in a harmless manner. Manufacturers shall comply with relevant national and local environmental laws and regulations, and ensure that pollutant emissions meet the requirements of national and local total emission control and permit management. Manufacturers shall install energy metering devices in accordance with GB 17167, and equip with pollutant monitoring and online monitoring equipment in accordance with environmental laws, regulations, and standards. Manufacturers shall comply with safety production norms, and have no major environmental pollution incidents within three years (or since the start of production, if less than three years). Participating products in the green design product evaluation shall meet the basic performance requirements of the corresponding product standards and satisfy design

Development Information

Related Standards