GB/T 2022-1980
Replaced
T/CCAS 013.1-2020
Active
Group standards
T/CCAS 013.1-2020 Cement enterprise lubrication management - Part 1: Guidelines for cement enterprise lubrication management
T/CCAS 013.1-2020 Cement enterprise lubrication management - Part 1: Guidelines for cement enterprise lubrication management
Price:
$ 28.00
Basic Information
Standard Code:
T/CCAS 013.1-2020
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Cement
ICS Name:
Cement, gypsum, lime, and mortar
Publish Date:
2020-06-30
Implement Date:
2020-09-30
Pages:
20 pages
Scope
This part of T/CCAS 013 stipulates the general requirements for lubrication management of cement enterprises' equipment, the establishment of reasonable lubrication plans, the selection and modification of lubricants for key equipment, lubricant storage requirements, lubricant addition and replacement requirements, equipment lubrication monitoring, pollution control, waste oil recycling and utilization, as well as health, safety and environmental protection, etc.
This part is applicable to the full-process lubrication management of crushing, grinding, firing, waste heat power generation and other equipment in cement enterprises.
Development Information
Same series standard
T/CCAS 013.2-2020 Cement enterprise lubrication management - Part 2: Specification for the use of closed gear oil in cement enterprises
T/CCAS 013.3-2020 Cement enterprise lubrication management - Part 3: Specification for the use of turbine oils in cement enterprises
T/CCAS 013.4-2020 Cement enterprise lubrication management - Fourth part: Cement enterprise hydraulic oil usage specifications
Referenced Standards
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 3141-1994 Industrial liquid lubricants—ISO viscosity classification
GB/T 4016-2019 Terminology relating to petroleum products
GB/T 4756-1998 Petroleum liquids—Manual sampling
GB/T 4756-2015 Method for manual sampling of petroleum liquids
GB/T 7631.1-1987 Lubricants and related products (class L)—Classification—Part 1:General
GB/T 7631.1-2008 Lubricants,industrial oils and related products(class L)—Classification—Part 1:General
GB/T 7631.2-2003 Lubricants,industrial oils and related products(class L)—Classification—Part 2:Family H(Hydraulic systems)
GB/T 7631.7-1995 Lubricants and related products (class L)—Classification—Part 7:Family C (gears)
GB/T 7631.10-1992 Lubricants and related products(class L)—Classification—Part 10:Family T(Turbines)
GB/T 7631.10-2013 Lubricants,industrial oils and related products(class L)—Classification—Part 10:Family T(Turbines)
GB/T 13608-2009 General principle for rational lubrication technology
GB/T 17145-1997 Technical guides for collection and re-refining of used oil
NB/T 31130-2018 Wind power plant equipment lubrication technical supervision regulations
SH/T 0229
DB22/T 1793-2013 Hazardous waste and hazardous chemical handling guidelines
GB/T 7631.7-2025 Lubricants,industrial oils and related products(class L) of classification—Part 7:Family C(gear systems)
Related Standards
GB/T 177-1985
Abolished
GB/T 177-1985 Test method for strength of hydraulic cement mortar
GB/T 6645-1986
Replaced
GB/T 6645-1986 Granulated electric furnace phosphorous slag used for cement production
GB/T 7897.1-1987
Replaced
GB/T 7897.1-1987 Test method of mechanical properties of mortar for ferrocement General principle
GB/T 7897.2-1987
Replaced
GB/T 7897.2-1987 Test method of mechanical properties of mortar for ferrocement Test of bending strength
GB/T 7897.3-1987
Replaced